AD9355中文资料亚德诺数据手册PDF规格书

GENERAL DESCRIPTION

The AD9355 is a radio frequency (RF) transceiver with a single transmitter and dual receivers fully integrated into the device. This allows the part to be used for mobile and fixed WiMAX/WiBro wireless network systems. By incorporating an RF MxFE™, the AD9355 offers the combination of an RF front end and a mixedsignal baseband, enabling an easy-to-use JESD-207-compliant digital interface to the baseband application-specific integrated circuit (ASIC) or field-programmable gate array (FPGA). In addition, the AD9355 operates in the 3.3 GHz to 3.8 GHz range, covering most of the licensed and unlicensed bands. Channel bandwidths of 3.5 MHz, 4.375 MHz, 5 MHz, 7 MHz, 8.75 MHz, and 10 MHz are supported.

FEATURES

RF transceiver with integrated ADCs and DACs

IEEE 802.16 WiMAX/WiBro

Dual receivers, single transmitter

Operating band: 3.3 GHz to 3.8 GHz

3.5 MHz < BW < 10 MHz

Superior receiver sensitivity with NF < 3.5 dB

Manual Rx gain or autonomous AGC mode

Highly linear and spectrally pure transmitter

Tx EVM = −38 dB

Tx noise floor 22 MHz

Tx power control range of 58 dB, resolution of 0.25 dB

Integrated fractional-N synthesizer

10 Hz LO step size

LO integrated phase noise < 0.5°rms

Automatic frequency correction < 0.012 ppm

Industry-standard JESD-207 digital interface

APPLICATIONS

BWA/WiMAX/WiBro CPEs USB dongles/minicards

Pico and femto base stations

Proprietary radio systems