Internally Trimmed Integrated Circuit Multiplier

GENERAL DESCRIPTION The AD532 is the first pretrimmed single chip monolithic multiplier/divider. It guarantees a maximum multiplying error of ±1.0 and a ±10 V output voltage without the need for any external trimming resistors or output op amp. Because the AD532 is internally trimmed, its simplic

文件：136.13 Kbytes 页数：7 Pages

AD

亚德诺

Ultralow Input Bias Current Operational Amplifier

GENERAL DESCRIPTION The AD5491 is a monolithic electrometer operational amplifier with very low input bias current. Input offset voltage and input offset voltage drift are laser trimmed for precision performance. The ultralow input current of the part is achieved with Topgate™ JFET technology, a

文件：418.53 Kbytes 页数：12 Pages

AD

亚德诺

PrecisionSample-and-Hold with 16-Channel Multiplexer

PRODUCTDESCRIPTION TheAD362isacomplete, precision 16-channel data acquisition system analoginput section in hybrid integrated circuit form. Large-scalelinear integrated circuitry, thick- and thinfilm technology andactive laser trimming givesthe AD362 extensive applications versatility alongwith

文件：3.48906 Mbytes 页数：8 Pages

AD

亚德诺

Software Programmable Gain Amplifier

PRODUCT DESCRIPTION The AD526 is a single-ended, monolithic software program mable gain amplifier (SPGA) that provides gains of 1, 2, 4, 8 and 16. It is complete, including amplifier, resistor network and TTL-compatible latched inputs, and requires no external components. Low gain error and

文件：464.02 Kbytes 页数：14 Pages

AD

亚德诺

Low Noise, 90 MHz Variable-Gain Amplifier

GENERAL DESCRIPTION The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of −11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using on

文件：219.5 Kbytes 页数：14 Pages

AD

亚德诺

Low Cost, Low Power Instrumentation Amplifier

PRODUCT DESCRIPTION The AD620 is a low cost, high accuracy instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000. Furthermore, the AD620 features 8-lead SOIC and DIP packaging that is smaller than discrete designs and offers lower power (only 1.3 mA max su

文件：571.34 Kbytes 页数：16 Pages

AD

亚德诺

Balanced Modulator/Demodulator

PRODUCT DESCRIPTION The AD630 is a high precision balanced modulator that combines a flexible commutating architecture with the accuracy and temperature stability afforded by laser wafer trimmed thin film resistors. Its signal processing applications include balanced modulation and demodulation

文件：288.39 Kbytes 页数：8 Pages

AD

亚德诺

Voltage-to-Frequency and Frequency-to-Voltage Converter

PRODUCT DESCRIPTION The AD650 V/F/V (voltage-to-frequency or frequency-to-voltage converter) provides a combination of high frequency operation and low nonlinearity previously unavailable in monolithic form. The inherent monotonicity of the V/F transfer function makes the AD650 useful as a high

文件：392.41 Kbytes 页数：20 Pages

AD

亚德诺

High Speed Sample-and-Hold Amplifier

文件：119.47 Kbytes 页数：3 Pages

AD

亚德诺

Dual, Low Noise, Wideband Variable Gain Amplifiers

GENERAL DESCRIPTION The AD600/AD6021 dual-channel, low noise, variable gain amplifiers are optimized for use in ultrasound imaging systems but are applicable to any application requiring precise gain, low noise and distortion, and wide bandwidth. Each independent channel provides a gain of 0 dB t

文件：669.88 Kbytes 页数：20 Pages

AD

亚德诺