16 V, 4 MHz Rail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The AD866x family are single supply, rail-to-rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 V. They also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. Fo

文件：524.79 Kbytes 页数：16 Pages

AD

亚德诺

Ultralow Noise Amplifier at Lower Power

FEATURES Ultralow noise: 2.8 nV/√Hz at 1 kHz typical Ultralow distortion: 0.0002% typical Low supply current: 1.8 mA per amplifier typical Offset voltage: 1 mV maximum Bandwidth: 6.5 MHz typical Slew rate: 12 V/μs typical Dual-supply operation: ±4.5 V to ±18 V Unity-gain stable Extended

文件：1.0978 Mbytes 页数：24 Pages

AD

亚德诺

16 V, 4 MHz RR0 Amplifiers

FEATURES Offset voltage: 2.5 mV max Low input bias current: 1 pA max Single-supply operation: 5 V to 16 V Dual-supply operation: ±2.5 V to ±8 V Low noise: 8 nV/√Hz @ 10 kHz Wide bandwidth: 4 MHz Rail-to-rail output Unity-gain stable Lead-free packaging AD8666/AD8668 qualified for automot

文件：621.13 Kbytes 页数：16 Pages

AD

亚德诺

Ultralow Noise Amplifier at Lower Power

文件：1.57654 Mbytes 页数：24 Pages

AD

亚德诺

16 V, 4 MHz RR0 Amplifiers

文件：621.68 Kbytes 页数：16 Pages

AD

亚德诺

16V、4Mhz、轨到轨输出双通道运算放大器

AD866x系列均为单电源、低噪声、轨到轨输出放大器，具有最高16 V的宽工作电压范围，另外还具有低输入偏置电流、宽信号带宽以及低输入电压和电流噪声等特性。如需更低的失调电压，请选择AD8661/AD8662/AD8664系列。\n\n 低失调、极低输入偏置电流和宽电源电压范围特性相结合，使这些放大器适合各种通常需要较昂贵JFET放大器的低成本应用。诸如光电二极管等采用高阻抗传感器的系统，均可受益于低输入偏置电流、低噪声、低失调和宽带宽等特性组合优势。宽工作电压范围也符合高性能ADC和DAC的要求。高输入阻抗、低电压和电流噪声、宽带宽以及无爆米花噪声（其它许多低输入偏置电流放大器中存 • 失调电压：2.5 mV（最大值）\n\n• 低输入偏置电流：1 pA（最大值）\n\n• 单电源供电：5 V至16 V\n\n• 双电源供电：±2.5 V至±8 V\n\n• 低噪声：8 nV/√Hz (10 kHz)\n\n• 宽带宽：4 MHz\n\n• 轨到轨输出\n\n• 单位增益稳定\n\n• 无铅封装\n\n• 通过汽车应用认证;

ADI

亚德诺

丝印：A16；Package：MSOP；16 V, 4 MHz RR0 Amplifiers

FEATURES Offset voltage: 2.5 mV max Low input bias current: 1 pA max Single-supply operation: 5 V to 16 V Dual-supply operation: ±2.5 V to ±8 V Low noise: 8 nV/√Hz @ 10 kHz Wide bandwidth: 4 MHz Rail-to-rail output Unity-gain stable Lead-free packaging AD8666/AD8668 qualified for automot

文件：621.13 Kbytes 页数：16 Pages

AD

亚德诺

16 V, 4 MHz Rail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The AD866x family are single supply, rail-to-rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 V. They also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. Fo

文件：524.79 Kbytes 页数：16 Pages

AD

亚德诺

16 V, 4 MHz Rail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The AD866x family are single supply, rail-to-rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 V. They also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. Fo

文件：524.79 Kbytes 页数：16 Pages

AD

亚德诺

丝印：A16；Package：MSOP；16 V, 4 MHz RR0 Amplifiers

FEATURES Offset voltage: 2.5 mV max Low input bias current: 1 pA max Single-supply operation: 5 V to 16 V Dual-supply operation: ±2.5 V to ±8 V Low noise: 8 nV/√Hz @ 10 kHz Wide bandwidth: 4 MHz Rail-to-rail output Unity-gain stable Lead-free packaging AD8666/AD8668 qualified for automot

文件：621.13 Kbytes 页数：16 Pages

AD

亚德诺