16V Low Cost, High Performance CMOS Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The AD8661/AD8662/AD8664 are rail-to-rail output, single-supply amplifiers that use the Analog Devices, Inc., patented DigiTrim® trimming technique to achieve low offset voltage. The AD866x series features extended operating ranges, with supply voltages up to 16 V. It also fea

文件：184.17 Kbytes 页数：5 Pages

AD

亚德诺

Low Noise, Precision 16 V CMOS, Rail-to-Rail Operational Amplifiers

FEATURES Low offset voltage: 100 μV maximum at VS = 5 V Low input bias current: 1 pA maximum Single-supply operation: 5 V to 16 V Low noise: 10 nV/√Hz Wide bandwidth: 4 MHz Unity-gain stable Small package options 3 mm × 3 mm 8-lead LFCSP 8-lead MSOP and narrow SOIC 14-lead TSSOP and narr

文件：569.73 Kbytes 页数：16 Pages

AD

亚德诺

Low Noise, Precision 16 V CMOS, Rail-to-Rail Operational Amplifiers

文件：613.76 Kbytes 页数：16 Pages

AD

亚德诺

Low Noise, Precision 16 V CMOS, Rail-to-Rail Operational Amplifiers

文件：570.31 Kbytes 页数：16 Pages

AD

亚德诺

16 V精密CMOS轨到轨四路运算放大器

AD8661 / AD8662 / AD8664均为轨到轨输出、单电源放大器，采用ADI公司的DigiTrim®调整专利技术来实现低失调电压特性。AD8661 / AD8662 / AD8664系列具有最高16 V的宽工作电压范围，另外还具有低输入偏置电流、宽信号带宽以及低输入电压和电流噪声等特性。\n\n 低失调、极低输入偏置电流和宽电源电压范围特性相结合，使这些放大器适合各种通常需要较昂贵JFET放大器的应用。诸如光电二极管等采用高阻抗传感器的系统，均可受益于低输入偏置电流、低噪声、低失调和宽带宽等特性组合优势。宽工作电压范围也符合高性能模数转换器(ADC)和数模转换器(DAC) • 低失调电压：100 μV（最大值，VS = 5 V）\n\n• 低输入偏置电流：1 pA（最大值）\n\n• 单电源供电：5 V至16 V\n\n• 低噪声：10 nV/√Hz\n\n• 宽带宽：4 MHz\n\n• 单位增益稳定\n\n• 小型封装选择\n• 3 mm × 3 mm、8引脚LFCSP封装\n\n• 8引脚MSOP和窄体SOIC封装\n\n• 14引脚TSSOP和窄体SOIC封装;

ADI

亚德诺

Low Noise, Precision 16 V CMOS, Rail-to-Rail Operational Amplifiers

FEATURES Low offset voltage: 100 μV maximum at VS = 5 V Low input bias current: 1 pA maximum Single-supply operation: 5 V to 16 V Low noise: 10 nV/√Hz Wide bandwidth: 4 MHz Unity-gain stable Small package options 3 mm × 3 mm 8-lead LFCSP 8-lead MSOP and narrow SOIC 14-lead TSSOP and narr

文件：569.73 Kbytes 页数：16 Pages

AD

亚德诺

16V Low Cost, High Performance CMOS Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The AD8661/AD8662/AD8664 are rail-to-rail output, single-supply amplifiers that use the Analog Devices, Inc., patented DigiTrim® trimming technique to achieve low offset voltage. The AD866x series features extended operating ranges, with supply voltages up to 16 V. It also fea

文件：184.17 Kbytes 页数：5 Pages

AD

亚德诺

Low Noise, Precision 16 V CMOS, Rail-to-Rail Operational Amplifiers

FEATURES Low offset voltage: 100 μV maximum at VS = 5 V Low input bias current: 1 pA maximum Single-supply operation: 5 V to 16 V Low noise: 10 nV/√Hz Wide bandwidth: 4 MHz Unity-gain stable Small package options 3 mm × 3 mm 8-lead LFCSP 8-lead MSOP and narrow SOIC 14-lead TSSOP and narr

文件：569.73 Kbytes 页数：16 Pages

AD

亚德诺

Low Noise, Precision 16 V CMOS, Rail-to-Rail Operational Amplifiers

FEATURES Low offset voltage: 100 μV maximum at VS = 5 V Low input bias current: 1 pA maximum Single-supply operation: 5 V to 16 V Low noise: 10 nV/√Hz Wide bandwidth: 4 MHz Unity-gain stable Small package options 3 mm × 3 mm 8-lead LFCSP 8-lead MSOP and narrow SOIC 14-lead TSSOP and narr

文件：569.73 Kbytes 页数：16 Pages

AD

亚德诺

16V Low Cost, High Performance CMOS Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The AD8661/AD8662/AD8664 are rail-to-rail output, single-supply amplifiers that use the Analog Devices, Inc., patented DigiTrim® trimming technique to achieve low offset voltage. The AD866x series features extended operating ranges, with supply voltages up to 16 V. It also fea

文件：184.17 Kbytes 页数：5 Pages

AD

亚德诺