Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

文件：568.56 Kbytes 页数：20 Pages

AD

亚德诺

Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

文件：289.72 Kbytes 页数：20 Pages

AD

亚德诺

Single-Supply JFET Amplifiers

文件：290.32 Kbytes 页数：20 Pages

AD

亚德诺

精密、低功耗、单电源、JFET放大器，采用MSOP封装

AD862x是一款精密JFET输入放大器。它具有真正的单电源供电、低功耗和轨到轨输出等特性。当容性负载超过500 pF时，输出仍能保持稳定；每个放大器的电源电流小于630 µA。AD862x的具体应用包括：光电二极管跨导放大，ATE基准电平驱动器，电池管理，线路供电和便携式仪器仪表，以及包括汽车传感器在内的远程传感器信号调理。 AD862x具有近似轨到轨输入与轨到轨输出摆幅能力，因而可以在单电源系统中缓冲CMOS、DAC、ASIC及其它宽输出摆幅器件。\n\n 5 MHz带宽和低失调特性则特别适合精密滤波器。\n\n AD862x的额定温度范围为-40°C至+85 • SC70封装\n\n• 极低IB：1 pA(最大值)\n\n• 单电源供电：5 V至26 V\n\n• 双电源供电： ±2.5 V至 ±13 V\n\n• 轨到轨输出\n\n• 低电源电流：每个放大器630µA(典型值)\n\n• 低失调电压：500µV(最大值)\n\n• 单位增益稳定\n\n• 无反相;

ADI

亚德诺

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

文件：568.56 Kbytes 页数：20 Pages

AD

亚德诺

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

文件：568.56 Kbytes 页数：20 Pages

AD

亚德诺

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

文件：568.56 Kbytes 页数：20 Pages

AD

亚德诺

丝印：BJA；Package：MSOP；Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

文件：289.72 Kbytes 页数：20 Pages

AD

亚德诺

丝印：BJA；Package：MSOP；Precision Low Power Single-Supply JFET Amplifiers

FEATURES SC70 package Very low IB: 1 pA max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±13 V Rail-to-rail output Low supply current: 630 μA/amp typ Low offset voltage: 500 μV max Unity gain stable No phase reversal APPLICATIONS Photodiode amplifiers ATEs Line-power

文件：289.72 Kbytes 页数：20 Pages

AD

亚德诺

Precision Low Power Single-Supply JFET Amplifier

GENERAL DESCRIPTION The AD862x is a precision JFET input amplifier. It features true single-supply operation, low power consumption, and rail-to-rail output. The outputs remain stable with capacitive loads of over 500 pF; the supply current is less than 630 μA/amp. Applications for the AD862x inc

文件：568.56 Kbytes 页数：20 Pages

AD

亚德诺