Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

文件：559.84 Kbytes 页数：20 Pages

AD

亚德诺

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Low offset voltage: 65 μV maximum Low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Wide bandwidth: 10 MHz High open-loop gain: 1000 V/mV Unity gain stable Single-supply operation: 2.7 V to 5.5 V 5-ball WLCSP for single (AD8605) and 8-ball WLCSP for dual (AD8606) APPLICATIONS

文件：878.42 Kbytes 页数：24 Pages

AD

亚德诺

Ultralow Noise Amplifier at Lower Power

FEATURES Ultralow noise: 2.8 nV/√Hz at 1 kHz typical Ultralow distortion: 0.0002% typical Low supply current: 1.8 mA per amplifier typical Offset voltage: 1 mV maximum Bandwidth: 6.5 MHz typical Slew rate: 12 V/μs typical Dual-supply operation: ±4.5 V to ±18 V Unity-gain stable Extended

文件：1.0978 Mbytes 页数：24 Pages

AD

亚德诺

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

文件：738.12 Kbytes 页数：24 Pages

AD

亚德诺

Ultralow Noise Amplifier at Lower Power

文件：1.57654 Mbytes 页数：24 Pages

AD

亚德诺

High Accuracy Impedance Measurements Using 12-Bit Impedance Converters

文件：200.72 Kbytes 页数：6 Pages

AD

亚德诺

精密、低噪声、轨到轨输入输出、CMOS运算放大器（双路）

AD8605、AD8606和AD8608分别是单路、双路和四路、轨到轨输入和输出、单电源放大器，具有极低失调电压、低输入电压和电流噪声以及宽信号带宽等特性。这些放大器采用ADI公司的DigiTrim®调整专利技术，无需激光调整便可达到出色的精度。\n\n 低失调、低噪声、极低的输入偏置电流和高速度特性相结合，使这些放大器适合各种应用。滤波器、积分器、光电二极管放大器和高阻抗传感器等器件均可受益于这些特性组合。宽带宽和低失真特性则有益于音频和其它交流应用。具体应用包括光学控制环路、便携式和环路供电仪器仪表以及便携式设备的音频放大。\n\n AD8605、AD8606和AD86 • 提供中文数据手册\n\n• 低失调电压: 65 µV（最大值） \n\n• 低输入偏置电流: 1 pA（最大值） \n\n• 低噪声: 8 nV/√Hz \n\n• 宽带宽: 10 MHZ\n\n• 高开环增益: 1000 V/mV\n\n• 单位增益稳定 \n\n• 单电源供电：2.7 V至5.5 V\n\n• 5引脚WLCSP封装（单路放大器AD8605），8引脚WLCSP封装（双路放大器AD8606）;

ADI

亚德诺

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

文件：836.93 Kbytes 页数：24 Pages

AD

亚德诺

丝印：B6A；Package：WLCSP；Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Low offset voltage: 65 μV maximum Low input bias currents: 1 pA maximum Low noise: 8 nV/√Hz Wide bandwidth: 10 MHz High open-loop gain: 1000 V/mV Unity gain stable Single-supply operation: 2.7 V to 5.5 V 5-ball WLCSP for single (AD8605) and 8-ball WLCSP for dual (AD8606) APPLICATIONS

文件：878.42 Kbytes 页数：24 Pages

AD

亚德诺

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8605, AD8606, and AD86081 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers. They feature very low offset voltage, low input voltage and current noise, and wide signal bandwidth. They use the Analog Devices, Inc. patented DigiTrim® trimmi

文件：836.93 Kbytes 页数：24 Pages

AD

亚德诺