丝印：AD8541；Package：TSSOP；SN74ACT8541 Octal Buffers With 3-State Outputs And Schmitt-Trigger Inputs

1 Features • Operating voltage range of 4.5V to 5.5V • TTL-compatible Schmitt-trigger inputs support slow and noisy input signals • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Fast operation with delay of 9

文件：1.50145 Mbytes 页数：24 Pages

TI

德州仪器

丝印：A12；Package：SC70；CMOS Rail-to-Rail General-Purpose Amplifiers

FEATURES ► Single-supply operation: 2.7 V to 5.5 V ► Low supply current: 45 μA/amplifier ► Wide bandwidth: 1 MHz ► No phase reversal ► Low input currents: 4 pA ► Unity gain stable ► Rail-to-rail input and output ► AEC-Q100 qualified for automotive applications APPLICATIONS ► ASIC input o

文件：1.18866 Mbytes 页数：18 Pages

AD

亚德诺

丝印：A4A；Package：SOT-23；CMOS Rail-to-Rail General-Purpose Amplifiers

FEATURES ► Single-supply operation: 2.7 V to 5.5 V ► Low supply current: 45 μA/amplifier ► Wide bandwidth: 1 MHz ► No phase reversal ► Low input currents: 4 pA ► Unity gain stable ► Rail-to-rail input and output ► AEC-Q100 qualified for automotive applications APPLICATIONS ► ASIC input o

文件：1.18866 Mbytes 页数：18 Pages

AD

亚德诺

丝印：A4A；Package：SOT-23；CMOS Rail-to-Rail General-Purpose Amplifiers

FEATURES ► Single-supply operation: 2.7 V to 5.5 V ► Low supply current: 45 μA/amplifier ► Wide bandwidth: 1 MHz ► No phase reversal ► Low input currents: 4 pA ► Unity gain stable ► Rail-to-rail input and output ► AEC-Q100 qualified for automotive applications APPLICATIONS ► ASIC input o

文件：1.18866 Mbytes 页数：18 Pages

AD

亚德诺

CMOS Rail-to-Rail General-Purpose ifiers

GENERAL DESCRIPTION The AD8541/AD8542/AD8544 are single, dual, and quad rail to-rail input and output, single-supply amplifiers featuring very low supply current and 1 MHz bandwidth. All are guaranteed to operate from a 2.7 V single supply as well as a 5 V supply. These parts provide 1 MHz bandwi

文件：315.75 Kbytes 页数：20 Pages

AD

亚德诺

1.1MHz, 85μA, CMOS, RRIO Operational Amplifiers

Features  High Gains of >100 dB for Active Filters and Gain Stages  Low Offset Voltage: 3.5 mV Maximum with 2 μV/℃ Low Drift  Gain-Bandwidth Product: 1.1 MHz  High Slew Rate: 0.8 V/μs  Low Power: 85 μA per Amplifier Supply Current  Settling Time to 0.1 with 2V Step: 4.5 μs  Unit G

文件：3.33485 Mbytes 页数：19 Pages

UMW

友台半导体

22 μA, RRIO, CMOS, 18 V Operational Amplifier

FEATURES Micropower at high voltage (18 V): 22 μA maximum Low input bias current: 20 pA maximum Gain bandwidth product: 240 kHz at AV =100 typical Unity-gain crossover: 240 kHz −3 dB closed-loop bandwidth: 310 kHz Slew rate: 80 V/ms Large signal voltage gain: 110 dB minimum Single-supply operat

文件：709.49 Kbytes 页数：24 Pages

AD

亚德诺

CMOS Rail-to-Rail General-Purpose Amplifiers

FEATURES ► Single-supply operation: 2.7 V to 5.5 V ► Low supply current: 45 μA/amplifier ► Wide bandwidth: 1 MHz ► No phase reversal ► Low input currents: 4 pA ► Unity gain stable ► Rail-to-rail input and output ► AEC-Q100 qualified for automotive applications APPLICATIONS ► ASIC input o

文件：1.18866 Mbytes 页数：18 Pages

AD

亚德诺

16 V, 1 MHz, CMOS Rail-to-Rail Input/Output Operational Amplifier

FEATURES Lower power at high voltage: 290 μA per amplifier typical Low input bias current: 1 pA maximum Wide bandwidth: 1.2 MHz typical Slew rate: 1 V/μs typical Offset voltage drift: 3 μV/°C typical Single-supply operation: 5 V to 16 V Dual-supply operation: ±2.5 V to ±8 V Unity gain stab

文件：697.23 Kbytes 页数：20 Pages

AD

亚德诺

General Purpose CMOS Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8541/AD8542/AD8544 are single, dual, and quad rail to-rail input and output, single-supply amplifiers featuring very low supply current and 1 MHz bandwidth. All are guaranteed to operate from a 2.7 V single supply as well as a 5 V supply. These parts provide 1 MHz bandwi

文件：232.11 Kbytes 页数：16 Pages

AD

亚德诺