1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

GENERAL DESCRIPTION The AD8515 is a rail-to-rail amplifier that can operate from a single-supply voltage as low as 1.8 V. The AD8515 single amplifier, available in 5-lead SOT-23 and 5-lead SC70 packages, is small enough to be placed next to sensors, reducing external noise pickup. FEATURES

文件：242.53 Kbytes 页数：16 Pages

AD

亚德诺

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

FEATURES Single-supply operation: 1.8 V to 5 V Offset voltage: 6 mV maximum Space-saving SOT-23 and SC70 packages Slew rate: 2.7 V/μs Bandwidth: 5 MHz Rail-to-rail input and output swing Low input bias current: 2 pA typical Low supply current @ 1.8 V: 450 μA maximum APPLICATIONS Portable comm

文件：290.09 Kbytes 页数：16 Pages

AD

亚德诺

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

文件：370.27 Kbytes 页数：16 Pages

AD

亚德诺

1.8 V、低功耗、CMOS轨到轨输入/输出运算放大器

AD8515是一款轨到轨放大器，可以采用低至1.8 V的单电源供电。\n\n AD8515单路放大器提供5引脚SOT-23和5引脚SC70两种小尺寸封装，完全可以靠近传感器放置，从而可减少外部噪声影响。\n\n 这是一款轨到轨输入和输出放大器，采用1.8 V电源时的增益带宽为5 MHz，典型失调电压为1 mV。低电源电流特性使这些器件成为电池供电应用的理想之选。AD8515的压摆率为2.7 V/μs，因此特别适合驱动ASIC输入，如语音编解码器等。\n\n AD8515的额定温度范围为-40℃至+125℃扩展工业温度范围。 • 单电源供电：1.8 V至5 V\n\n• 失调电压：6 mV(最大值)\n\n• 节省空间的SOT-23和SC70封装\n\n• 压摆率：2.7 V/μs\n\n• 带宽：5 MHz\n\n• 轨到轨输入和输出摆幅\n\n• 低输入偏置电流：2 pA(典型值)\n\n• 低电源电流：450 μA (最大值，1.8 V);

ADI

亚德诺

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

FEATURES Single-supply operation: 1.8 V to 5 V Offset voltage: 6 mV maximum Space-saving SOT-23 and SC70 packages Slew rate: 2.7 V/μs Bandwidth: 5 MHz Rail-to-rail input and output swing Low input bias current: 2 pA typical Low supply current @ 1.8 V: 450 μA maximum APPLICATIONS Portable comm

文件：290.09 Kbytes 页数：16 Pages

AD

亚德诺

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

GENERAL DESCRIPTION The AD8515 is a rail-to-rail amplifier that can operate from a single-supply voltage as low as 1.8 V. The AD8515 single amplifier, available in 5-lead SOT-23 and 5-lead SC70 packages, is small enough to be placed next to sensors, reducing external noise pickup. FEATURES

文件：242.53 Kbytes 页数：16 Pages

AD

亚德诺

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

FEATURES Single-supply operation: 1.8 V to 5 V Offset voltage: 6 mV maximum Space-saving SOT-23 and SC70 packages Slew rate: 2.7 V/μs Bandwidth: 5 MHz Rail-to-rail input and output swing Low input bias current: 2 pA typical Low supply current @ 1.8 V: 450 μA maximum APPLICATIONS Portable comm

文件：290.09 Kbytes 页数：16 Pages

AD

亚德诺

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

FEATURES Single-supply operation: 1.8 V to 5 V Offset voltage: 6 mV maximum Space-saving SOT-23 and SC70 packages Slew rate: 2.7 V/μs Bandwidth: 5 MHz Rail-to-rail input and output swing Low input bias current: 2 pA typical Low supply current @ 1.8 V: 450 μA maximum APPLICATIONS Portable comm

文件：290.09 Kbytes 页数：16 Pages

AD

亚德诺

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

FEATURES Single-supply operation: 1.8 V to 5 V Offset voltage: 6 mV maximum Space-saving SOT-23 and SC70 packages Slew rate: 2.7 V/μs Bandwidth: 5 MHz Rail-to-rail input and output swing Low input bias current: 2 pA typical Low supply current @ 1.8 V: 450 μA maximum APPLICATIONS Portable comm

文件：290.09 Kbytes 页数：16 Pages

AD

亚德诺

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier

GENERAL DESCRIPTION The AD8515 is a rail-to-rail amplifier that can operate from a single-supply voltage as low as 1.8 V. The AD8515 single amplifier, available in 5-lead SOT-23 and 5-lead SC70 packages, is small enough to be placed next to sensors, reducing external noise pickup. FEATURES

文件：242.53 Kbytes 页数：16 Pages

AD

亚德诺