60 MHz, 2000 V/us Monolithic Op Amp

GENERAL DESCRIPTION The AD844 is a high speed monolithic operational amplifier fabricated using the Analog Devices, Inc., junction isolated complementary bipolar (CB) process. It combines high bandwidth and very fast large signal response with excellent dc performance. Although optimized for use

文件：493.18 Kbytes 页数：12 Pages

AD

亚德诺

60 MHz, 2000 V/μs, Monolithic Op Amp with Quad Low Noise

FEATURES Wide bandwidth 60 MHz at gain of −1 33 MHz at gain of −10 Slew rate: 2000 V/μs 20 MHz full power bandwidth, 20 V p-p, RL = 500 Ω Fast settling: 100 ns to 0.1% (10 V step) Differential gain error: 0.03% at 4.4 MHz Differential phase error: 0.16° at 4.4 MHz Low offset voltage: 150

文件：380.64 Kbytes 页数：20 Pages

AD

亚德诺

60 MHz, 2000 V/us Monolithic Op Amp

文件：250 Kbytes 页数：16 Pages

AD

亚德诺

60 MHZ、2000 V/µS单芯片运算放大器

AD844是一款高速单芯片运算放大器，采用ADI公司的结隔离互补双极性(CB)工艺制造，具有高带宽、非常快速的大信号响应特性和出色的直流性能。它虽然针对电流转电压应用进行了优化，主要用作反向模式放大器，但也适合许多同相应用。AD844可取代传统的运算放大器使用，而它的电流反馈结构可以实现更加出色的交流性能、高线性度和异常干净的脉冲响应。 这类运算放大器提供闭环带宽，其主要由反馈电阻决定，与闭环增益基本无关。AD844不具有传统运算放大器和其他电流反馈型运算放大器的压摆率限制。20 V全输出步进时，峰值输出变化率可超过2000 V/μs。0.1%建立时间为100 ns（典型值），实质上与 • 宽带宽：60 MHz，增益为-1时 \n\n• 宽带宽：33 MHz，增益为-10时 \n\n• 极高输出压摆率：最高2000 V/μs\n\n• 全功率带宽：20 MHz全功率带宽，20 V p-p，RL = 500 Ω \n\n• 0.1%快速建立时间：100 ns（10 V步进）\n\n• 差分增益误差：0.03% (4.4 MHz)\n\n• 差分相位误差：0.158 (4.4 MHz)\n\n• 低失调电压：最大值150 mV（B级） \n\n• 低静态电流：6.5 mA\n\n• 依据EIA-481A标准提供卷带和\n卷盘形式;

ADI

亚德诺

60 MHz, 2000 V/μs, Monolithic Op Amp with Quad Low Noise

FEATURES Wide bandwidth 60 MHz at gain of −1 33 MHz at gain of −10 Slew rate: 2000 V/μs 20 MHz full power bandwidth, 20 V p-p, RL = 500 Ω Fast settling: 100 ns to 0.1% (10 V step) Differential gain error: 0.03% at 4.4 MHz Differential phase error: 0.16° at 4.4 MHz Low offset voltage: 150

文件：380.64 Kbytes 页数：20 Pages

AD

亚德诺

60 MHz, 2000 V/μs, Monolithic Op Amp with Quad Low Noise

FEATURES Wide bandwidth 60 MHz at gain of −1 33 MHz at gain of −10 Slew rate: 2000 V/μs 20 MHz full power bandwidth, 20 V p-p, RL = 500 Ω Fast settling: 100 ns to 0.1% (10 V step) Differential gain error: 0.03% at 4.4 MHz Differential phase error: 0.16° at 4.4 MHz Low offset voltage: 150

文件：380.64 Kbytes 页数：20 Pages

AD

亚德诺

60 MHz, 2000 V/us Monolithic Op Amp

GENERAL DESCRIPTION The AD844 is a high speed monolithic operational amplifier fabricated using the Analog Devices, Inc., junction isolated complementary bipolar (CB) process. It combines high bandwidth and very fast large signal response with excellent dc performance. Although optimized for use

文件：493.18 Kbytes 页数：12 Pages

AD

亚德诺

60 MHz 2000 V Monolithic Op Amp

GENERAL DESCRIPTION The AD844 is a high speed monolithic operational amplifier fabricated using the Analog Devices, Inc., junction isolated complementary bipolar (CB) process. It combines high bandwidth and very fast large signal response with excellent dc performance. Although optimized for use

文件：422.52 Kbytes 页数：20 Pages

AD

亚德诺

60 MHz, 2000 V/us Monolithic Op Amp

GENERAL DESCRIPTION The AD844 is a high speed monolithic operational amplifier fabricated using the Analog Devices, Inc., junction isolated complementary bipolar (CB) process. It combines high bandwidth and very fast large signal response with excellent dc performance. Although optimized for use

文件：493.18 Kbytes 页数：12 Pages

AD

亚德诺

60 MHz, 2000 V/μs, Monolithic Op Amp with Quad Low Noise

FEATURES Wide bandwidth 60 MHz at gain of −1 33 MHz at gain of −10 Slew rate: 2000 V/μs 20 MHz full power bandwidth, 20 V p-p, RL = 500 Ω Fast settling: 100 ns to 0.1% (10 V step) Differential gain error: 0.03% at 4.4 MHz Differential phase error: 0.16° at 4.4 MHz Low offset voltage: 150

文件：380.64 Kbytes 页数：20 Pages

AD

亚德诺