AD8436ACPZ-WP集成电路（IC）的RMS至DC转换器规格书PDF中文资料

AD8436ACPZ-WP属于集成电路（IC）的RMS至DC转换器。由亚德诺半导体技术有限公司制造生产的AD8436ACPZ-WPRMS 至 DC 转换器RMS 至 DC 转换器产品族中的产品可用于执行测量时变波形的数学功能，并返回一个与等效稳态 (DC) 值成比例的值，如果将其应用于电阻负载，则会产生相同的功率耗散。这些转换器通常用于交流电源相关应用中的测量，它们之间以及它们与用于类似终端的其他技术之间的区别在于输入为非正弦波形时所给出结果的准确性。

GENERAL DESCRIPTION

The AD8436 is a new generation, translinear precision, low power, true rms-to-dc converter loaded with options. It computes a precise dc equivalent of the rms value of ac waveforms, including complex patterns such as those generated by switch mode power supplies and triacs. Its accuracy spans a wide range of input levels (see Figure 2) and temperatures. The ensured accuracy of ≤±0.5 and ≤10 μV output offset result from the latest Analog Devices, Inc., technology. The crest factor error is <0.5 for CF values between 1 and 10.

The AD8436 delivers true rms results at less cost than misleading peak, averaging, or digital solutions. There is no programming expense or processor overhead to consider, and the 4 mm  4 mm package easily fits into tight applications. On-board buffer amplifiers enable the widest range of options for any rms-to-dc converter available, regardless of cost. For minimal applications, only a single external averaging capacitor is required. The built-in high impedance FET buffer provides an interface for external attenuators, frequency compensation, or driving low impedance loads. A matched pair of internal resistors enables an easily configurable gain-of-two or more, extending the usable input range even lower. The low power, precision input buffer makes the AD8436 attractive for use in portable multi-meters and other battery-powered applications.

FEATURES

Delivers true rms or average rectified value of ac waveform

Fast settling at all input levels

Accuracy: ±10 μV ± 0.25 of reading (B grade)

Wide dynamic input range

100 μV rms to 3 V rms (8.5 V p-p) full-scale input range

Larger inputs with external scaling

Wide bandwidth:

1 MHz for −3 dB (300 mV)

65 kHz for additional 1 error

Zero converter dc output offset

No residual switching products

Specified at 300 mV rms input

Accurate conversion with crest factors up to 10

Low power: 300 µA typical at ±2.4 V

High-Z FET separately powered input buffer

RIN ≥ 1012 Ω, CIN ≤ 2 pF

Precision dc output buffer

Wide power supply voltage range

Dual: ±2.4 V to ±18 V; single: 4.8 V to 36 V

4 mm × 4 mm LFCSP and 8 mm × 6 mm QSOP packages

ESD protected