Rail-to-Rail, High Output Current Amplifier

GENERAL DESCRIPTION The AD8397 has two voltage feedback operational amplifiers capable of driving heavy loads with excellent linearity. The common-emitter, rail-to-rail output stage surpasses the output voltage capability of typical emitter-follower output stages and can swing to within 0.5 V o

文件：379.73 Kbytes 页数：16 Pages

AD

亚德诺

Rail-to-Rail, High Output Current Amplifier

FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within 0.5 V of supply rails High linear output current 310 mA peak into 32 Ω on ±12 V supplies while maintaining −80 dBc SFDR Low noise 4.5 nV/√Hz voltage noise density

文件：306.16 Kbytes 页数：16 Pages

AD

亚德诺

轨到轨、高输出电流放大器

AD8397内置两个电压反馈型运算放大器，能够以出色的线性度驱动高负载。共发射极、轨到轨输出级的输出电压能力优于典型发射极-跟随器输出级，驱动25 Ω负载时摆幅可以达到任一供电轨的0.5 V范围以内。低失真、高输出电流和宽输出动态范围使AD8397特别适合要求高负载上大信号摆幅的应用。\n\n AD8397采用ADI公司的高速超快速互补双极性高压(XFCB-HV)工艺制造，高带宽和快速压摆率特性使失真降至较低。AD8397采用标准8引脚SOIC_N封装；针对较高功耗应用，还提供散热增强型8引脚SOIC_N_EP封装。两种封装的工作温度范围均为−40°C至+85°C。 • 双路运算放大器\n\n• 电压反馈\n\n• 宽电源电压范围：3 V至24 V\n\n• 轨到轨输出\n\n• 输出摆幅达到供电轨0.5 V范围内\n\n\n\n\n• 高线性输出电流\n\n• 310 mA(峰值，32 Ω，±12 V电源)，无杂散动态范围(SFDR)：-80 dBc;

ADI

亚德诺

Rail-to-Rail, High Output Current Amplifier

FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within 0.5 V of supply rails High linear output current 310 mA peak into 32 Ω on ±12 V supplies while maintaining −80 dBc SFDR Low noise 4.5 nV/√Hz voltage noise density

文件：306.16 Kbytes 页数：16 Pages

AD

亚德诺

Rail-to-Rail, High Output Current Amplifier

FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within 0.5 V of supply rails High linear output current 310 mA peak into 32 Ω on ±12 V supplies while maintaining −80 dBc SFDR Low noise 4.5 nV/√Hz voltage noise density

文件：306.16 Kbytes 页数：16 Pages

AD

亚德诺

Rail-to-Rail, High Output Current Amplifier

GENERAL DESCRIPTION The AD8397 has two voltage feedback operational amplifiers capable of driving heavy loads with excellent linearity. The common-emitter, rail-to-rail output stage surpasses the output voltage capability of typical emitter-follower output stages and can swing to within 0.5 V o

文件：379.73 Kbytes 页数：16 Pages

AD

亚德诺

Rail-to-Rail, High Output Current Amplifier

GENERAL DESCRIPTION The AD8397 has two voltage feedback operational amplifiers capable of driving heavy loads with excellent linearity. The common-emitter, rail-to-rail output stage surpasses the output voltage capability of typical emitter-follower output stages and can swing to within 0.5 V o

文件：379.73 Kbytes 页数：16 Pages

AD

亚德诺

Rail-to-Rail, High Output Current Amplifier

FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within 0.5 V of supply rails High linear output current 310 mA peak into 32 Ω on ±12 V supplies while maintaining −80 dBc SFDR Low noise 4.5 nV/√Hz voltage noise density

文件：306.16 Kbytes 页数：16 Pages

AD

亚德诺

Rail-to-Rail, High Output Current Amplifier

FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within 0.5 V of supply rails High linear output current 310 mA peak into 32 Ω on ±12 V supplies while maintaining −80 dBc SFDR Low noise 4.5 nV/√Hz voltage noise density

文件：306.16 Kbytes 页数：16 Pages

AD

亚德诺

Rail-to-Rail, High Output Current Amplifier

GENERAL DESCRIPTION The AD8397 has two voltage feedback operational amplifiers capable of driving heavy loads with excellent linearity. The common-emitter, rail-to-rail output stage surpasses the output voltage capability of typical emitter-follower output stages and can swing to within 0.5 V o

文件：379.73 Kbytes 页数：16 Pages

AD

亚德诺