AD8318RF/IF射频/中频RFID的射频检测器规格书PDF中文资料

AD8318属于RF/IF射频/中频RFID的射频检测器。由亚德诺半导体技术有限公司制造生产的AD8318射频检测器射频检测器产品是用于测量射频信号的集成电路，包括适用于不同用途的许多型号，例如显示待测信号的峰值幅度，而非其平均值或 RMS 幅度。就这些产品探讨的常见主题包括能够测量高频信号输入、具有对数特征的传递函数。

GENERAL DESCRIPTION

The AD8318 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output voltage. It employs the progressive compression technique over a cascaded amplifier chain, each stage of which is equipped with a detector cell. The device is used in measurement or controller mode. The AD8318 maintains accurate log conformance for signals of 1 MHz to 6 GHz and provides useful operation to 8 GHz. The input range is typically 60 dB (referenced to 50 Ω) with error less than ±1 dB. The AD8318 has a 10 ns response time that enables RF burst detection to beyond 45 MHz. The device provides unprecedented logarithmic intercept stability vs. ambient temperature conditions. A 2 mV/°C slope temperature sensor output is also provided for additional system monitoring. A single supply of 5 V is required. Current consumption is typically 68 mA. Power consumption decreases to

FEATURES

Wide bandwidth: 1 MHz to 8 GHz

High accuracy: ±1.0 dB over 55 dB range (f < 5.8 GHz)

Stability over temperature: ±0.5 dB

Low noise measurement/controller output (VOUT)

Pulse response time: 10 ns/12 ns (fall/rise)

Integrated temperature sensor

Small footprint LFCSP

Power-down feature: <1.5 mW at 5 V

Single-supply operation: 5 V at 68 mA

Fabricated using high speed SiGe process

APPLICATIONS

RF transmitter PA setpoint control and level monitoring

RSSI measurement in base stations, WLAN, WiMAX, and

radars