Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

GENERAL DESCRIPTION The AD823 is a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output volta

文件：439.85 Kbytes 页数：16 Pages

AD

亚德诺

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier

文件：411.61 Kbytes 页数：20 Pages

AD

亚德诺

MicroConverter짰 12-Bit ADCs and DACs with Embedded High Speed 62-kB Flash MCU

文件：908.68 Kbytes 页数：88 Pages

AD

亚德诺

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

文件：465.86 Kbytes 页数：20 Pages

AD

亚德诺

双通道、16 MHz、轨到轨FET输入放大器

AD823是一款双通道、精密、16 MHz、JFET输入运算放大器，可采用3.0 V至36 V单电源或±1.5 V至±18 V双电源供电。它具有单电源供电能力，在单电源模式下输入电压范围可扩展至地电压以下。IOUT ≤ 100 µA时，输出电压摆幅可扩展至各供电轨50 mV以内，从而可提供出色的输出动态范围。 \n\n 直流精度性能包括最大800 μV的失调电压、2 μV/°C的失调电压漂移、小于25 pA的输入偏置电流以及低输入电压噪声，源阻抗最高可达1 GΩ。该器件提供16 MHz、−3 dB带宽、−108 dB THD (20 kHz)、22 V/μs压摆率和每个放大器2.6 • 单电源供电\n轨到轨输出摆幅\n输入电压范围扩大到地电位以下\n单电源供电能力：3 V至36 V\n\n• 高负载驱动\n容性负载驱动：500 pF(G = +1)\n输出电流：15 mA（与电源相差0.5 V时）\n\n• 低失真：−108 dBc（最差谐波，20 kHz）\n\n• 低噪声：16nV/√Hz(10 kHz)\n\n• 出色的直流性能\n输入失调电压：800 μV（最大值）\n失调电压漂移：2 μV/°C\n输入偏置电流：25 pA（最大值）\n\n• 出色的交流性能：每个放大器2.6 mA\n−3 dB带宽：16 MHz (G = +1)\n0.01%建立时间：;

ADI

亚德诺

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

FEATURES Single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V to 36 V High load drive Capacitive load drive of 500 pF, G = +1 Output current of 15 mA, 0.5 V from supplies Excellent ac performance on 2.6 mA/amplifier

文件：411.61 Kbytes 页数：20 Pages

AD

亚德诺

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

文件：400.33 Kbytes 页数：16 Pages

AD

亚德诺

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

文件：400.33 Kbytes 页数：16 Pages

AD

亚德诺

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

文件：400.33 Kbytes 页数：16 Pages

AD

亚德诺

16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

GENERAL DESCRIPTION The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB (minimum) reje

文件：400.33 Kbytes 页数：16 Pages

AD

亚德诺