Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

文件：314.86 Kbytes 页数：16 Pages

AD

亚德诺

Dual-Current Output, Parallel Input, 16 /14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

文件：405.32 Kbytes 页数：20 Pages

AD

亚德诺

Dual, Current-Output, Serial-Input, 16-/14-Bit DACs

PRODUCT OVERVIEW The AD5545/AD5555 are 16-bit/14-bit, current-output, digital=to-analog converters designed to operate from a 4.5 V to 5.5 V supply range. FEATURES 16-bit resolution AD5545 14-bit resolution AD5555 ±1 LSB DNL monotonic ±1 LSB INL 2 mA full-scale current ±

文件：924.28 Kbytes 页数：24 Pages

AD

亚德诺

Dual-Current Output, Parallel Input, 16-/14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

文件：405.32 Kbytes 页数：20 Pages

AD

亚德诺

Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

文件：393.2 Kbytes 页数：20 Pages

AD

亚德诺

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：530.26 Kbytes 页数：20 Pages

AD

亚德诺

Low Cost, 300 MHz Rail-to-Rail Amplifiers

文件：452.93 Kbytes 页数：20 Pages

AD

亚德诺

低成本、300 MHz轨到轨放大器(双路)

AD8061/AD8062/AD8063均为轨到轨输出电压反馈型放大器，易于使用且成本低廉。这些放大器拥有一般电流反馈型放大器的带宽和压摆率，还具有宽输入共模电压范围和输出电压摆幅，因此易于使用，可采用低至2.7 V的单电源供电。\n\n 尽管AD8061/AD8062/AD8063成本很低，但仍能提供出色的整体性能。对于视频应用，驱动150Ω负载的差分增益和相位误差分别为0.01%和0.04°，0.1 dB增益平坦度为30 MHz。此外，这些放大器还具有300 MHz的宽带宽，压摆率为650 V/µs。\n\n AD8061/AD8062/AD8063的典型功耗为 • 低成本\n\n• 单路(AD8061)、双路(AD8062)\n\n• 单路带禁用特性(AD8063)\n\n• 高速 - 欲了解更多信息，请参考数据手册。\n\n• 低失调电压：6 mV\n\n• 高速 - 欲了解更多信息，请参考数据手册。\n\n• 采用2.7 V至8 V电源供电，输入电压范围 = −0.2 V至+3.2 V (VS = 5 V)\n\n• 出色的视频规格(RL = 150 Ω，G = 2) - 欲了解更多信息，请参考数据手册。\n\n• 欲了解更多特性，请参考数据手册;

ADI

亚德诺

Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Rail-to-rail output swing Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V suppli

文件：393.2 Kbytes 页数：20 Pages

AD

亚德诺

Low-Cost, 300 MHz Rail-to-Rail Amplifiers

GENERAL DESCRIPTION The AD8061/AD8062/AD8063 are rail-to-rail output voltage feedback amplifiers offering ease of use and low cost. They have a bandwidth and slew rate typically found in current feedback amplifiers. All have a wide input common-mode voltage range and output voltage swing, makin

文件：314.86 Kbytes 页数：16 Pages

AD

亚德诺