Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

文件：478.07 Kbytes 页数：24 Pages

AD

亚德诺

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

FEATURES ► High speed ► 190 MHz, −3 dB bandwidth (G = +1) ► 100 V/μs slew rate ► Low distortion ► 120 dBc at 1 MHz SFDR ► 80 dBc at 5 MHz SFDR ► Selectable input crossover threshold ► Low noise ► 4.3 nV/√Hz ► 1.6 pA/√Hz ► Low offset voltage: 900 μV maximum ► Low power: 6.5 mA per ampli

文件：1.8029 Mbytes 页数：27 Pages

AD

亚德诺

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

文件：699.19 Kbytes 页数：25 Pages

AD

亚德诺

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

文件：699.19 Kbytes 页数：25 Pages

AD

亚德诺

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

文件：612.87 Kbytes 页数：24 Pages

AD

亚德诺

低失真、高速轨到轨输入/输出放大器

AD8027/AD8028是具有轨到轨输入和输出的高速放大器，工作电压低，并专门针对高性能和宽动态信号范围进行了优化。 两款器件具有低噪声（4.3 nV/√Hz、1.6 pA/√Hz）和低失真（1 MHz时120 dBc）特性。 在使用一小部分或全部输入动态范围且要求低失真的应用中，AD8027/AD8028是理想之选。 。\n\n 当输入信号超越某一阈值电压时，许多轨到轨输入放大器的输入级便会从一个差分对切换到另一个差分对，这会引起失真。 AD8027/AD8028具有一个独特的特性，允许用户通过DISABLE/SELECT 引脚（采用10引脚MSOP封装为v，在本数据手册中，以下 • 高速\n-3 dB带宽：190 MHz (G = +1)\n\n• 100 V/µs压摆率\n\n• 低失真\nSFDR：120 dBc (1 MHz )\nSFDR：80 dBc (5 MHz )\n\n• 可选输入交越阈值\n\n• 低噪声：\n4.3 nV/ √Hz\n1.6 pA/ √Hz\n\n• 低失调电压： 900 µV(最大值)\n\n• 低功耗：6.5 mA(每放大器电源电流)\n\n• 关断模式 \n\n• 无相位反转： VIN > |VS| + 200 mV \n\n• 宽电源电压范围： 2.7 V至12 V \n\n• 小型封装： 8引脚SOIC、6引脚SOT-23;

ADI

亚德诺

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

文件：478.07 Kbytes 页数：24 Pages

AD

亚德诺

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

文件：478.07 Kbytes 页数：24 Pages

AD

亚德诺

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

文件：478.07 Kbytes 页数：24 Pages

AD

亚德诺

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

FEATURES ► High speed ► 190 MHz, −3 dB bandwidth (G = +1) ► 100 V/μs slew rate ► Low distortion ► 120 dBc at 1 MHz SFDR ► 80 dBc at 5 MHz SFDR ► Selectable input crossover threshold ► Low noise ► 4.3 nV/√Hz ► 1.6 pA/√Hz ► Low offset voltage: 900 μV maximum ► Low power: 6.5 mA per ampli

文件：1.8029 Mbytes 页数：27 Pages

AD

亚德诺