5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：339.98 Kbytes 页数：19 Pages

AD

亚德诺

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：326.05 Kbytes 页数：19 Pages

AD

亚德诺

5 V、轨到轨、高输出电流、xDSL线路驱动器放大器

AD8018是一款双通道、高速、低成本放大器，能够驱动在供电轨0.5 V范围内的低失真信号。它主要用于单电源xDSL系统，在这种系统中，低失真和低成本均至关重要，并且必须利用最低的电源电压在线路上获得较大的动态范围。每个放大器驱动最小350 mA的输出电流，同时100 kHz时无杂散动态范围(SFDR)仍保持为-95 dBc，这对于任何xDSL CPE（用户端设备）应用而言都是极为出色的性能。AD8018提供灵活的待机和关断模式。借助双位控制（以DGND为基准的阈值为1.5 V），可以进入完全待机（输出低阻抗）和关断（输出高阻抗）模式。\n\n AD8018采用ADI公司的高速XFC • 适用于USB、PCMCIA或基于PCI的用户端设备(CPE)的xDSL线路驱动器放大器\n\n• 轨到轨输出电压、高输出电流驱动\n\n• 输出电流：400 mA（至10 Ω 差分负载中，8 V峰峰值）\n\n• 低单音失真\n-86dBc（最差谐波，6 V峰峰值至10 Ω差分负载中，100kHz）\n\n• 低噪声\n电压噪声密度：4.5 nV/ √Hz (100kHz)\n\n• 带外SFDR：-82dBc(144kHz至\n500kHz，RLOAD= 12.5 Ω，PLINE= 13dBm) \n\n• 低功耗工作\n电源电压范围：3.3 V至8 V \n双逻辑位控制可实现待机和关断;

ADI

亚德诺

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：339.98 Kbytes 页数：19 Pages

AD

亚德诺

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：339.98 Kbytes 页数：19 Pages

AD

亚德诺

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：340.64 Kbytes 页数：19 Pages

AD

亚德诺

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：339.98 Kbytes 页数：19 Pages

AD

亚德诺

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：339.98 Kbytes 页数：19 Pages

AD

亚德诺

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：339.98 Kbytes 页数：19 Pages

AD

亚德诺

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

文件：326.05 Kbytes 页数：19 Pages

AD

亚德诺