AD7984集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

AD7984属于集成电路（IC）的模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的AD7984模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

GENERAL DESCRIPTION

The AD7625 is a 16-bit, 6 MSPS, charge redistribution successive approximation register (SAR) based architecture analog-to-digital converter (ADC). SAR architecture allows unmatched performance both in noise (93 dB SNR) and in linearity (1 LSB). The AD7625 contains a high speed, 16-bit sampling ADC, an internal conversion clock, and an internal buffered reference. On the CNV± rising edge, it samples the voltage difference between the IN+ and IN− pins. The voltages on these pins swing in opposite phase between 0 V and REF. The 4.096 V reference voltage, REF, can be generated internally or applied externally.

FEATURES

   Throughput: 6 MSPS

   SNR: 93 dB

   INL: ±0.45 LSB typical, ±1 LSB maximum

   DNL: ±0.3 LSB typical, ±0.5 LSB maximum

   Power dissipation: 135 mW

   32-lead LFCSP (5 mm × 5 mm)

   SAR architecture

      No latency/no pipeline delay

   16-bit resolution with no missing codes

   Zero error: ±1.5 LSB

   Differential input voltage: ±4.096 V

   Serial LVDS interface

      Self-clocked mode

      Echoed-clock mode

      Can use LVDS or CMOS for conversion control (CNV signal)

   Reference options

      Internal: 4.096 V

      External (1.2 V) buffered to 4.096 V

      External: 4.096 V

APPLICATIONS

   High dynamic range telecommunications

   Receivers

   Digital imaging systems

   High speed data acquisition

   Spectrum analysis

   Test equipment