Low Power, Low Noise Precision FET Op Amp

GENERAL DESCRIPTION The AD795 is a low noise, precision, FET input operational amplifier. It offers both the low voltage noise and low offset drift of a bipolar input op amp and the very low bias current of a FET input device. The 1014 Ω common-mode impedance insures that input bias current is es

文件：331.63 Kbytes 页数：16 Pages

AD

亚德诺

Low Power, Low Noise Precision FET Op Amp

FEATURES Low power replacement for Burr-Brown OPA111, OPA121 op amps Low noise 3.3 μV p-p maximum, 0.1 Hz to 10 Hz 11 nV/√Hz maximum at 10 kHz 0.6 fA/√Hz at 1 kHz High dc accuracy 500 μV maximum offset voltage 10 μV/°C maximum drift 2 pA maximum input bias current Low power: 1.5 mA maximum su

文件：435.8 Kbytes 页数：20 Pages

AD

亚德诺

Low Power, Low Noise Precision FET Op Amp

文件：278.48 Kbytes 页数：16 Pages

AD

亚德诺

低功耗、低噪声精密FET运算放大器

AD795是一款低噪声、精密、FET输入运算放大器。它既具有双极性输入运算放大器的低电压噪声和低失调漂移，又具有FET输入器件的极低偏置电流。1014 Ω共模阻抗可确保输入偏置电流实质上与共模电压和电源电压变化无关。\n\n AD795具有出色的直流性能以及经过测试的保证最大输入电压噪声。最大输入偏置电流为2 pA，最大失调电压为500 µV，最大电源电流仅为1.5 mA。\n\n 此外，AD795保证输入噪声低至3.3 μV p-p（0.1 Hz至10 Hz），10 kHz时最大噪声电平为11 nV/√Hz。经过测试的额定输入失调电压漂移最大值仅为10 μV/°C。\n\ • Burr-Brown OPA-111、OPA-121运算放大器的\n  低功耗替代产品\n\n• 低噪声\n  3.3 µV峰峰值（最大值，0.1 Hz至10 Hz）\n  11 nV/√Hz （最大值，10 kHz）\n  0.6 fA/√Hz (1 kHz)\n\n• 高直流精度\n   失调电压：500 µV （最大值）\n  漂移：10 µV/°C （最大值）\n  输入偏置电流：2 pA （最大值）\n  低功耗: \n电源电流：1.5 mA（最大值）;

ADI

亚德诺

Low Power, Low Noise Precision FET Op Amp

FEATURES Low power replacement for Burr-Brown OPA111, OPA121 op amps Low noise 3.3 μV p-p maximum, 0.1 Hz to 10 Hz 11 nV/√Hz maximum at 10 kHz 0.6 fA/√Hz at 1 kHz High dc accuracy 500 μV maximum offset voltage 10 μV/°C maximum drift 2 pA maximum input bias current Low power: 1.5 mA maximum su

文件：435.8 Kbytes 页数：20 Pages

AD

亚德诺

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial

文件：868.1 Kbytes 页数：32 Pages

AD

亚德诺

16-Bit, 250 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7610 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

文件：820.12 Kbytes 页数：32 Pages

AD

亚德诺

14-Bit, 1 MSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7951 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only serial

文件：761.75 Kbytes 页数：33 Pages

AD

亚德诺

14-Bit, 1 MSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7951 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only serial

文件：761.75 Kbytes 页数：33 Pages

AD

亚德诺

14-Bit, 1 MSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7951 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only serial

文件：761.75 Kbytes 页数：33 Pages

AD

亚德诺