AD7683BRMZ集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

AD7683BRMZ属于集成电路（IC）的模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的AD7683BRMZ模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

GENERAL DESCRIPTION

The AD7683 is a 16-bit, charge redistribution, successive approximation, PulSAR® analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.7 V and 5.5 V. It contains a low power, high speed, 16-bit sampling ADC with no missing codes (B grade), an internal conversion clock, and a serial, SPI-compatible interface port. The part also contains a low noise, wide bandwidth, short aperture delay, track-and-hold circuit. On the CSfalling edge, it samples an analog input, +IN, between 0 V to REF with respect to a ground sense, –IN. The reference voltage, REF, is applied externally and can be set up to the supply voltage. Its power scales linearly with throughput. The AD7683 is housed in an 8-lead MSOP or an 8-lead QFN

(LFCSP) package, with an operating temperature specified from −40°C to +85°C.

FEATURES

16-bit resolution with no missing codes

Throughput: 100 kSPS

INL: ±1 LSB typical, ±3 LSB maximum

Pseudo differential analog input range

0 V to VREFwith VREFup to VDD

Single-supply operation: 2.7 V to 5.5 V

Serial interface SPI/QSPI/MICROWIRE/DSP compatible

Power dissipation: 4 mW @ 5 V, 1.5 mW @ 2.7 V,

150 μW @ 2.7 V/10 kSPS

Standby current: 1 nA

8-lead packages:

MSOP

3 mm × 3 mm QFN (LFCSP) (SOT-23 size)

Improved second source to ADS8320 and ADS8325

APPLICATIONS

Battery-powered equipment

Data acquisition

Instrumentation

Medical instruments

Process control