AD7381-4集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

AD7381-4属于集成电路（IC）的模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的AD7381-4模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

GENERAL DESCRIPTION

The 16-bit AD7383-4 and 14-bit AD7384-4 are pin-compatible,

quad, simultaneous sampling, high speed, successive approximation

register (SAR), analog-to-digital converters (ADCs) operating

from a 3.0 V to 3.3 V power supply with throughput rates up to

4 MSPS. The analog input type is a pseudo differential and is

sampled and converted on the falling edge of CS.

The AD7383-4/AD7384-4 have on-chip oversampling blocks to

improve dynamic range and reduce noise at lower bandwidths. The

oversampling boosts up to two bits of added resolution. A buffered

internal 2.5 V reference is included. Alternatively, an external reference

up to 3.3 V can be used.

The conversion process and data acquisition use standard control

inputs allowing easy interfacing to microprocessors or digital signal

processors (DSPs). The conversion result can clock out simultaneously

via 4-wire mode for faster throughput or via 1-wire serial

mode when slower throughput is allowed. The devices are compatible

with 1.8 V, 2.5 V, and 3.3 V interfaces using the separate logic supply.

FEATURES

► 16-bit and 14-bit ADC family

► Quad simultaneous sampling

► Pseudo differential analog inputs

► High throughput rate: 4 MSPS

► SNR: 86.7 dB (typical) at VREF = 3.3 V (AD7383-4)

► On-chip oversampling function

► SNR: 91 dB (typical) with OSR = 8×, RES = 1

► 2-bit resolution boost

► Out of range indicator (ALERT)

► INL: 3.8 LSBs (maximum)

► High speed serial interface

► Temperature range: −40°C to +125°C

► 24-lead, 4 mm × 4 mm LFCSP

APPLICATIONS

► Motor control position feedback

► Motor control current sense

► Data acquisition systems

► Erbium-doped fiber amplifier (EDFA) applications

► Inphase and quadrature demodulation

PRODUCT HIGHLIGHTS

1. Quad simultaneous sampling and conversion.

2. Pin-compatible product family.

3. High 4 MSPS throughput rate.

4. Space-saving 4 mm × 4 mm LFCSP.

5. Integrated oversampling block to increase dynamic range, reduce

noise, and reduce SCLK speed requirements.

6. Pseudo differential analog inputs.

7. Small sampling capacitor reduces amplifier drive burden.