GENERAL DESCRIPTION

The AD7306 line driver/receiver is a 5 V monolithic product

which provides an interface between TTL signal levels and dual

standard EIA RS-232/RS-422 signal levels. The part contains

two RS-232 drivers, one RS-422 driver, one RS-232 receiver,

and one receiver path which can be configured either as RS-232

or as RS-422.

An internal charge pump voltage converter facilitates operation

from a single +5 V power supply. The internal charge pump

generates ±10 V levels allowing RS-232 output levels to be developed

without the need for external bipolar power supplies.

A highly efficient charge pump design allows operation using

non polarized, miniature 0.1 mF capacitors. This gives a considerable

saving in printed circuit board space over conventional

products which can use up to 10 mF capacitors. The charge

pump output voltages may also be used to power external circuitry

which requires dual supplies.

The RS-232 channels are suitable for communications rates up

to 100 kHz and the RS-422 channels are suitable for high speed

communications up to 5 MHz. The RS-422 transmitter complementary

outputs are closely matched and feature low timing

skew between the complementary outputs. This is often an essential

requirement to meet tight system timing specifications.

All inputs feature ESD protection, all driver outputs feature

high source and sink current capability and are internally protected

against short circuits on the outputs. An epitaxial layer is

used to guard against latch-up.

The part is available in a 24-lead SOIC and 24-pin plastic DIP package.

FEATURES

RS-232 and RS-422 on One Chip

Single +5 V Supply

0.1 mF Capacitors

Short Circuit Protection

Excellent Noise Immunity

Low Power BiCMOS Technology

High Speed, Low Skew RS-422 Operation

–408C to +858C Operations

APPLICATIONS

DTE-DCE Interface

Packet Switching

Local Area Networks

Data Concentration

Data Multiplexers

Integrated Services Digital Network (ISDN)

AD7306AR属于集成电路（IC） > 驱动器，接收器，收发器。亚德诺半导体技术有限公司制造生产的AD7306AR驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。