Precision Instrumentation Amplifier

PRODUCT DESCRIPTION The AD624 is a high precision, low noise, instrumentation amplifier designed primarily for use with low level transducers, including load cells, strain gauges and pressure transducers. An outstanding combination of low noise, high gain accuracy, low gain temperature coeffici

文件：691.59 Kbytes 页数：15 Pages

AD

亚德诺

Precision, Dual-Channel Instrumentation Amplifier

GENERAL DESCRIPTION The AD8222 is a dual-channel, high performance instrumentation amplifier that requires only one external resistor per amplifier to set gains of 1 to 10,000. The AD8222 is the first dual-instrumentation amplifier in the small 4 mm × 4mm LFCSP. It requires the same board area a

文件：595.66 Kbytes 页数：24 Pages

AD

亚德诺

10 MHz, 20 V/關s, G = 1, 10, 100, 1000 i CMOS짰 Programmable Gain Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

文件：217.53 Kbytes 页数：10 Pages

AD

亚德诺

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

文件：378.74 Kbytes 页数：20 Pages

AD

亚德诺

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

文件：284.57 Kbytes 页数：20 Pages

AD

亚德诺

Precision Instrumentation Amplifier

PRODUCT DESCRIPTION The AD624 is a high precision, low noise, instrumentation amplifier designed primarily for use with low level transducers, including load cells, strain gauges and pressure transducers. An outstanding combination of low noise, high gain accuracy, low gain temperature coeffici

文件：574.51 Kbytes 页数：17 Pages

AD

亚德诺

Zero Drift, Digitally Programmable Instrumentation Amplifier

文件：725.71 Kbytes 页数：24 Pages

AD

亚德诺

Wide Supply Range, Rail-to-Rail

文件：805.88 Kbytes 页数：28 Pages

AD

亚德诺

Wide Supply Range, Micropower,

文件：529.22 Kbytes 页数：28 Pages

AD

亚德诺

高精度、低噪声仪表放大器

AD624是一款高精度、低噪声仪表放大器，主要设计用于低电平传感器，包括负荷传感器、应变计和压力传感器。它融低噪声、高增益精度、低增益温度系数和高线性度于一体，适合用于高分辨率数据采集系统。 AD624C的输入失调电压漂移小于0.25 µV/°C，输出失调电压漂移小于10 µV/°C，单位增益时的共模抑制比(CMRR)高于80 dB(G = 500时为130 dB)，最大非线性度为0.001% (G = 1)。除上述优异的直流特性外，AD624的交流性能也同样出色。它具有25 MHz的增益带宽积、5 V/µs压摆率和15 µs建立时间，因此可用于高速数据采集应用。 • 低噪声：0.2 µV峰峰值(0.1 Hz至10 Hz)\n\n• 低增益温度系数(TC)：5 ppm (最大值，G = 1)\n\n• 低非线性度：0.001%(最大值，G = 1至200)\n\n• 高共模抑制比(CMRR)：130 dB\n(最小值，G = 500至1000)\n\n• 引脚可编程增益：1、100、200、500、1000\n\n• 低输入失调电压：25 µV(最大值)\n\n• 低输入失调电压漂移：0.25 µV/°C(最大值)\n\n• 增益带宽积：25 MHz\n\n• 无需外部元件\n\n• 内部补偿;

ADI

亚德诺