Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal

文件：202.41 Kbytes 页数：8 Pages

AD

亚德诺

Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermo couple input to derive an intern

文件：778.64 Kbytes 页数：8 Pages

AD

亚德诺

丝印：AD596；Package：WQFN；SN74ACT596 8-Bit Shift Register With Open-Drain Output Registers And TTLCompatible Inputs

1 Features • Operating voltage range of 4.5V to 5.5V • TTL-compatible inputs • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Fast operation with delay of 11.6ns max 2 Applications • Increase the number of

文件：1.91795 Mbytes 页数：31 Pages

TI

德州仪器

丝印：AD596；Package：TSSOP；SN74ACT596 8-Bit Shift Register With Open-Drain Output Registers And TTLCompatible Inputs

1 Features • Operating voltage range of 4.5V to 5.5V • TTL-compatible inputs • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Fast operation with delay of 11.6ns max 2 Applications • Increase the number of

文件：1.91795 Mbytes 页数：31 Pages

TI

德州仪器

配合J型热电偶使用的热电偶调节器和设定点控制器

AD596/AD597是单芯片温度设定点控制器，专门针对高温环境（如烤箱控制应用）进行了优化。该器件可对J或K型热电偶输入进行冷结补偿和放大，从而获得与温度成比例的内部信号。内部信号随后与外部施加的设定点电压相比较，产生低阻抗开关输出电压。死区或开关迟滞可利用单个外部电阻进行编程。或者，可以将AD596/AD597配置成直接利用J型或K型热电偶信号来提供电压输出(10 mV/°C)。它也可以用作独立的电压输出温度传感器。\nAD596/AD597可采用+5 V至+30 V的单电源或总范围宽达36 V的双电源供电。典型静态电源电流为160 µA，自热误差极小。\nAD596/AD597 H封装选 • 配合J型(AD596)或K型(AD597)热电偶工作\n• 内置冰点补偿\n• 温度比例工作模式：–10 mV/°C\n• 低成本\n• 温度设定点工作模式：开/关\n• 可编程开关迟滞\n• 高阻抗差分输入;

ADI

亚德诺

Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal

文件：202.41 Kbytes 页数：8 Pages

AD

亚德诺

THERMOCOUPLE CONDITIONER AND SETPOINT CONTROLLER

文件：778.64 Kbytes 页数：8 Pages

AD

亚德诺

丝印：AD596Q；Package：WQFN；SN74ACT596-Q1 Automotive 8-Bit Shift Register With Open-Drain Output Registers And TTL-Compatible Inputs

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Operating voltage range of 4.5V to 5.5V • TTL-compatible i

文件：1.94429 Mbytes 页数：31 Pages

TI

德州仪器

Package：TO-100-10 金属罐；包装：管件 功能：热电偶调节器 类别：集成电路（IC） 热管理 描述：IC THERMOCOUPLE COND TO-100-10

AD

亚德诺