AD5762R集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

AD5762R属于集成电路（IC）的数模转换器（DAC）。由亚德诺半导体技术有限公司制造生产的AD5762R数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

GENERAL DESCRIPTION

The AD5762R is a dual, 16-bit, serial input, bipolar voltage output DAC that operates from supply voltages of ±11.4 V to ±16.5 V. Nominal full-scale output range is ±10 V. The AD5762R provides integrated output amplifiers, reference buffers, and proprietary power-up/power-down control circuitry. The device also features a digital input/output port, programmed via the serial interface, and an analog temperature sensor. The device incorporates digital offset and gain adjust registers per channel.

FEATURES

Complete dual, 16-bit, digital-to-analog converter (DAC)

Programmable output range: ±10 V, ±10.2564 V, or ±10.5263 V

±1 LSB maximum INL error, ±1 LSB maximum DNL error

Low noise: 60 nV/√Hz

Settling time: 10 µs maximum

Integrated reference buffers

Internal reference: 10 ppm/°C maximum

On-chip die temperature sensor

Output control during power-up/brownout

Programmable short-circuit protection

Simultaneous updating via LDAC

Asynchronous CLR to zero code

Digital offset and gain adjust

Logic output control pins

DSP-/microcontroller-compatible serial interface

Temperature range: −40°C to +85°C

Industrial complementary metal-oxide semiconductor

(iCMOS) process technology

APPLICATIONS

Industrial automation

Open-loop/closed-loop servo control

Process control

Data acquisition systems

Automatic test equipment

Automotive test and measurement

High accuracy instrumentation