AD5697RBCPZ-RL7集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

AD5697RBCPZ-RL7属于集成电路（IC）的数模转换器（DAC）。由亚德诺半导体技术有限公司制造生产的AD5697RBCPZ-RL7数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

GENERAL DESCRIPTION

The AD5697R, a member of the nanoDAC+™ family, is a low power, dual, 12-bit buffered voltage output digital-to-analog converter (DAC). The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The AD5697R operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1 FSR gain error and 1.5 mV offset error performance. The device is available in a 3 mm × 3 mm LFCSP and a TSSOP package.

FEATURES

Low drift 2.5 V reference: 2 ppm/°C typical

Tiny package: 3 mm × 3 mm, 16-lead LFCSP

Total unadjusted error (TUE): ±0.1 of full-scale range (FSR) maximum

Offset error: ±1.5 mV maximum

Gain error: ±0.1 of FSR maximum

High drive capability: 20 mA, 0.5 V from supply rails

User selectable gain of 1 or 2 (GAIN pin)

Reset to zero scale or midscale (RSTSEL pin)

1.8 V logic compatibility

Low glitch: 0.5 nV-sec

400 kHz I2C-compatible serial interface

Low power: 3.3 mW at 3 V

2.7 V to 5.5 V power supply

−40°C to +105°C temperature range

APPLICATIONS

Base station power amplifiers

Process controls (programmable logic controller [PLC] I/O cards)

Industrial automation

Data acquisition systems