2.7 V to 5.5 V, 250 uA, Rail-to-Rail Output 16-Bit DAC D/A in a SOT-23

GENERAL DESCRIPTION The AD5662, a member of the nanoDAC family, is a low power, single, 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply and is guaranteed monotonic by design. FEATURES Low power (250 μA @ 5 V) single 16-bit nanoDAC 12-bit accuracy guarant

文件：357.18 Kbytes 页数：20 Pages

AD

亚德诺

Industrial Current/Voltage Output Driver

文件：695.1 Kbytes 页数：36 Pages

AD

亚德诺

2.7-5.5V、16位nanoDAC®转换器，采用SOT-23封装

AD5662属于nanoDAC®系列，是一款低成本、低功耗、单通道、16位、缓冲电压输出、保证单调性的模数转换器(DAC)。\n\n 该器件内置一个上电复位电路，确保DAC输出上电至0 V或中间电平（视型号而定），并保持该电平，直到执行一次有效的写操作为止。该器件的典型功耗为250 µA，还具有省电特性，在省电模式下，器件在5 V时的功耗降至1 µA，并提供软件可选输出负载。\n\n AD5662采用多功能三线式串行接口，能够以最高30 MHz的时钟速率工作，并与标准SPI™、QSPI™、MICROWIRE™、DSP接口标准兼容。它内置片内精密输出放大器，能够实现轨到轨输出 • 16位单调性DAC，保证12位精度\n\n• 提供8引脚SOT-23和8引脚MSOP封装\n\n• 上电复位至零电平或中间电平。\n\n• 建立时间：10 µs\n\n• 低功耗。采用2.7 V至5.5 V电源供电。3 V时典型功耗为0.35 mW，5 V时为0.7 mW，因而特别适合电池供电应用 \n\n• 关断功能。省电模式下，3 V时DAC的典型功耗为50 nA，5 V时为200 nA。;

ADI

亚德诺

2.7 V to 5.5 V, 250 uA, Rail-to-Rail Output 16-Bit DAC D/A in a SOT-23

GENERAL DESCRIPTION The AD5662, a member of the nanoDAC family, is a low power, single, 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply and is guaranteed monotonic by design. FEATURES Low power (250 μA @ 5 V) single 16-bit nanoDAC 12-bit accuracy guarant

文件：357.18 Kbytes 页数：20 Pages

AD

亚德诺

16-Bit nanoDAC in a SOT-23

GENERAL DESCRIPTION The AD5662, a member of the nanoDAC family, is a low power, single, 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply and is guaranteed monotonic by design. FEATURES Low power (250 μA @ 5 V) single 16-bit nanoDAC 12-bit accuracy guarant

文件：584.4 Kbytes 页数：24 Pages

AD

亚德诺

16-Bit nanoDAC in a SOT-23

GENERAL DESCRIPTION The AD5662, a member of the nanoDAC family, is a low power, single, 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply and is guaranteed monotonic by design. FEATURES Low power (250 μA @ 5 V) single 16-bit nanoDAC 12-bit accuracy guarant

文件：584.4 Kbytes 页数：24 Pages

AD

亚德诺

2.7 V to 5.5 V, 250 uA, Rail-to-Rail Output 16-Bit DAC D/A in a SOT-23

GENERAL DESCRIPTION The AD5662, a member of the nanoDAC family, is a low power, single, 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply and is guaranteed monotonic by design. FEATURES Low power (250 μA @ 5 V) single 16-bit nanoDAC 12-bit accuracy guarant

文件：357.18 Kbytes 页数：20 Pages

AD

亚德诺

16-Bit nanoDAC in a SOT-23

GENERAL DESCRIPTION The AD5662, a member of the nanoDAC family, is a low power, single, 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply and is guaranteed monotonic by design. FEATURES Low power (250 μA @ 5 V) single 16-bit nanoDAC 12-bit accuracy guarant

文件：584.4 Kbytes 页数：24 Pages

AD

亚德诺

16-Bit nanoDAC in a SOT-23

GENERAL DESCRIPTION The AD5662, a member of the nanoDAC family, is a low power, single, 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply and is guaranteed monotonic by design. FEATURES Low power (250 μA @ 5 V) single 16-bit nanoDAC 12-bit accuracy guarant

文件：584.4 Kbytes 页数：24 Pages

AD

亚德诺

16-Bit nanoDAC in a SOT-23

GENERAL DESCRIPTION The AD5662, a member of the nanoDAC family, is a low power, single, 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply and is guaranteed monotonic by design. FEATURES Low power (250 μA @ 5 V) single 16-bit nanoDAC 12-bit accuracy guarant

文件：584.4 Kbytes 页数：24 Pages

AD

亚德诺