AD5420集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

AD5420属于集成电路（IC）的数模转换器（DAC）。由亚德诺半导体技术有限公司制造生产的AD5420数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

GENERAL DESCRIPTION

The AD5410/AD5420 are low cost, precision, fully integrated 12-/16-bit converters offering a programmable current source output designed to meet the requirements of industrial process control applications. The output current range is programmable at 4 mA to 20 mA, 0 mA to 20 mA, or an overrange function of 0 mA to 24 mA. The output is open-circuit protected. The device operates with a power supply (AVDD) range from 10.8 V to 60 V. Output loop compliance is 0 V to AVDD − 2.5 V.

The flexible serial interface is SPI, MICROWIRE™, QSPI™, and DSP compatible and can be operated in 3-wire mode to mini mize the digital isolation required in isolated applications. The device also includes a power-on reset function, ensuring that the device powers up in a known state, and an asynchronous CLEAR pin that sets the output to the low end of the selected current range.

The total unadjusted error is typically ±0.01 FSR.

FEATURES

12-/16-bit resolution and monotonicity

Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA, or

0 mA to 24 mA

±0.01 FSR typical total unadjusted error (TUE)

±3 ppm/°C typical output drift

Flexible serial digital interface

On-chip output fault detection

On-chip reference (10 ppm/°C maximum)

Feedback/monitoring of output current

Asynchronous clear function

Power supply (AVDD) range

10.8 V to 40 V; AD5410AREZ/AD5420AREZ

10.8 V to 60 V; AD5410ACPZ/AD5420ACPZ

Output loop compliance to AVDD − 2.5 V

Temperature range: −40°C to +85°C

24-lead TSSOP and 40-lead LFCSP packages

APPLICATIONS

Process control

Actuator control

PLC

HART network connectivity