AD5322BRM集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

AD5322BRM属于集成电路（IC）的数模转换器（DAC）。由亚德诺半导体技术有限公司制造生产的AD5322BRM数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

GENERAL DESCRIPTION

The AD5302/AD5312/AD5322 are dual 8-, 10-, and 12-bit buffered voltage output DACs in a 10-lead MSOP that operate from a single 2.5 V to 5.5 V supply, consuming 230 μA at 3 V. Their on-chip output amplifiers allow the outputs to swing rail to-rail with a slew rate of 0.7 V/μs. The AD5302/AD5312/AD5322 utilize a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards.

FEATURES

AD5302: Two 8-bit buffered DACs in 1 package

A version: ±1 LSB INL, B version: ±0.5 LSB INL

AD5312: Two 10-bit buffered DACs in 1 package

A version: ±4 LSB INL, B version: ±2 LSB INL

AD5322: Two 12-bit buffered DACs in 1 package

A version: ±16 LSB INL, B version: ±8 LSB INL

10-lead MSOP

Micropower operation: 300 μA @ 5 V (including

reference current)

Power-down to 200 nA @ 5 V, 50 nA @ 3 V

2.5 V to 5.5 V power supply

Double-buffered input logic

Guaranteed monotonic by design over all codes

Buffered/Unbuffered reference input options

0 V to VREF output voltage

Power-on-reset to 0 V

Simultaneous update of DAC outputs via LDAC

Low power serial interface with Schmitt-triggered inputs

On-chip rail-to-rail output buffer amplifiers

Qualified for automotive applications

APPLICATIONS

Portable battery-powered instruments

Digital gain and offset adjustment

Programmable voltage and current sources

Programmable attenuators