Dual, 10-Bit nanoDAC with 2 ppm/C Reference, SPI Interface

GENERAL DESCRIPTION The AD5313R, a member of the nanoDAC® family, is a low power, dual, 10-bit buffered voltage output digital-to-analog converter (DAC). The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain

文件：698.13 Kbytes 页数：28 Pages

AD

亚德诺

Dual, 10-Bit nanoDAC

文件：977.14 Kbytes 页数：26 Pages

AD

亚德诺

Dual, 10-Bit nanoDAC with 2 ppm/C Reference, SPI Interface

GENERAL DESCRIPTION The AD5313R, a member of the nanoDAC® family, is a low power, dual, 10-bit buffered voltage output digital-to-analog converter (DAC). The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain

文件：698.13 Kbytes 页数：28 Pages

AD

亚德诺

Dual, 10-Bit nanoDAC with 2 ppm/C Reference, SPI Interface

GENERAL DESCRIPTION The AD5313R, a member of the nanoDAC® family, is a low power, dual, 10-bit buffered voltage output digital-to-analog converter (DAC). The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain

文件：698.13 Kbytes 页数：28 Pages

AD

亚德诺

Dual, 10-Bit nanoDAC with 2 ppm/C Reference, SPI Interface

GENERAL DESCRIPTION The AD5313R, a member of the nanoDAC® family, is a low power, dual, 10-bit buffered voltage output digital-to-analog converter (DAC). The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain

文件：698.13 Kbytes 页数：28 Pages

AD

亚德诺

Dual, 10-Bit nanoDAC

文件：977.14 Kbytes 页数：26 Pages

AD

亚德诺

Dual, 10-Bit nanoDAC

文件：977.14 Kbytes 页数：26 Pages

AD

亚德诺

Dual, 10-Bit nanoDAC

文件：977.14 Kbytes 页数：26 Pages

AD

亚德诺

Dual, 10-Bit nanoDAC

文件：977.14 Kbytes 页数：26 Pages

AD

亚德诺

双通道、10位nanoDAC® ，内置2 ppm/°C基准电压源和SPI接口

AD5313R属于nanoDAC®系列，是一款低功耗、双通道、10位缓冲电压输出数模转换器(DAC)。该器件内置2.5 V、2 ppm/˚C内部基准电压源（默认使能）和增益选择引脚，满量程输出为2.5 V（增益=1）或5 V（增益=2）。它采用2.7 V至5.5 V单电源供电，通过设计保证单调性，并具有小于0.1% FSR的增益误差和1.5 mV的偏置误差性能。提供3 mm X 3 mm LFCSP和TSSOP封装。 AD5313R还内置一个上电复位电路和一个RSTSEL引脚，确保DAC输出上电至零电平或中间电平，直到执行一次有效的写操作为止。该器件具有各通道独立关断特性，在 • 低漂移2.5 V基准电压源：2 ppm/°C（典型值） \n\n• 小型封装：3 mm × 3 mm、16引脚LFCSP封装 \n\n• 总非调整误差(TUE) ：±0.1% FSR（最大值）\n\n• 失调误差：±1.5 mV（最大值）\n\n• 增益误差：±0.1% FSR（最大值）\n\n• 高驱动能力：20 mA，0.5 V（供电轨）;

ADI

亚德诺