AD5313集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

AD5313属于集成电路（IC）的数模转换器（DAC）。由亚德诺半导体技术有限公司制造生产的AD5313数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

GENERAL DESCRIPTION

The AD5303/AD5313/AD5323 are dual 8-/10-/12-bit buffered voltage output DACs in a 16-lead TSSOP package that operate from a single 2.5 V to 5.5 V supply, consuming 230 μA at 3 V. Their on-chip output amplifiers allow the outputs to swing rail-torail with a slew rate of 0.7 V/μs. The AD5303/AD5313/AD5323 utilize a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI™, MICROWIRE™, and DSP interface standards.

FEATURES

AD5303: 2 buffered 8-bit DACs in 1 package A version: ±1 LSB INL, B version: ±0.5 LSB INL

AD5313: 2 buffered 10-bit DACs in 1 package A version: ±4 LSB INL, B version: ±2 LSB INL

AD5323: 2 buffered 12-bit DACs in 1 package A version: ±16 LSB INL, B version: ±8 LSB INL

16-lead TSSOP package

Micropower operation: 300 μA @ 5 V (including reference current)

Power-down to 200 nA @ 5 V, 50 nA @ 3 V

2.5 V to 5.5 V power supply

Double-buffered input logic

Guaranteed monotonic by design over all codes

Buffered/unbuffered reference input options

Output range: 0 V to VREF or 0 V to 2 VREF

Power-on-reset to 0 V

SDO daisy-chaining option

Simultaneous update of DAC outputs via LDAC pin

Asynchronous CLR facility

Low power serial interface with Schmitt-triggered inputs

On-chip rail-to-rail output buffer amplifiers

APPLICATIONS

Portable battery-powered instruments

Digital gain and offset adjustment

Programmable voltage and current sources

Programmable attenuators