AD5304ARM集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

AD5304ARM属于集成电路（IC）的数模转换器（DAC）。由亚德诺半导体技术有限公司制造生产的AD5304ARM数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

GENERAL DESCRIPTION

The AD5304/AD5314/AD53241 are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming 500 μA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing to be achieved with a slew rate of 0.7 V/μs. A 3-wire serial interface is used; it operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards.

FEATURES

AD5304: 4 buffered 8-Bit DACs in 10-lead MSOP and

10-lead LFCSP

A, W Version: ±1 LSB INL, B Version: ±0.625 LSB INL

AD5314: 4 buffered 10-Bit DACs in 10-lead MSOP and

10-lead LFCSP

A, W Version: ±4 LSB INL, B Version: ±2.5 LSB INL

AD5324: 4 buffered 12-Bit DACs in 10-lead MSOP and

10-lead LFCSP

A, W Version: ±16 LSB INL, B Version: ±10 LSB INL

Low power operation: 500 μA @ 3 V, 600 μA @ 5 V

2.5 V to 5.5 V power supply

Guaranteed monotonic by design over all codes

Power-down to 80 nA @ 3 V, 200 nA @ 5 V

Double-buffered input logic

Output range: 0 V to VREF

Power-on reset to 0 V

Simultaneous update of outputs (LDAC function)

Low power-, SPI®-, QSPI™-, MICROWIRE™-, and

DSP-compatible 3-wire serial interface

On-chip, rail-to-rail output buffer amplifiers

Temperature range −40°C to +105°C

Qualified for automotive applications

APPLICATIONS

Portable battery-powered instruments

Digital gain and offset adjustment

Programmable voltage and current sources

Programmable attenuators

Industrial process controls