AD1555BPRL集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

AD1555BPRL属于集成电路（IC）的模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的AD1555BPRL模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

GENERAL DESCRIPTION

The AD1555 is a complete sigma-delta modulator, combined with a programmable gain amplifier intended for low frequency,high dynamic range measurement applications. The AD1555 outputs a ones-density bitstream proportional to the analog input. When used in conjunction with the AD1556 digital filter/ decimator, a high performance ADC is realized.

FEATURES

AD1555

Fourth Order Σ-Δ Modulator

Large Dynamic Range

116 dB Min, 120 dB Typical @ 1 ms

117 dB Typical @ 0.5 ms

Low Input Noise: 80 nV rms @ 4 ms with

Gain of 34,128

Low Distortion: –111 dB Max, –120 dB Typical

Low Intermodulation: 122 dB

Sampling Rate at 256 kSPS

Very High Jitter Tolerance

No External Antialias Filter Required

Programmable Gain Front End

Input Range: ±2.25 V

Robust Inputs

Gain Settings: 1, 2.5, 8.5, 34, 128

Common-Mode Rejection (DC to 1 kHz)

93 dB Min, 101 dB Typical @ Gain of 1

77 mW Typical Low Power Dissipation

Standby Modes

AD1556

FIR Digital Filter/Decimator

Serial or Parallel Selection of Configuration

Output Word Rates: 250 SPS to 16 kSPS

6.2 mW Typ Low Power Dissipation

70 mW in Standby Mode

Reference Design and Evaluation Board with

Software Available

APPLICATIONS

Seismic Data Acquisition Systems

Chromatography

Automatic Test Equipment