ACPL-P314 and ACPL-W314 0.6 Amp Output Current IGBT Gate Driver Optocoupler

Description The ACPL-P314/W314 consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage

文件：202.37 Kbytes 页数：14 Pages

AVAGO

安华高

0.6 Amp Output Current IGBT Gate Driver Optocoupler

Description The ACPL-P314/W314 consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage

文件：202.37 Kbytes 页数：14 Pages

AVAGO

安华高

0.6-Amp Output Current IGBT Gate Driver Optocoupler

文件：1.1794 Mbytes 页数：17 Pages

BOARDCOM

博通

0.6-Amp Output Current IGBT Gate Driver Optocoupler

文件：1.1794 Mbytes 页数：17 Pages

BOARDCOM

博通

ACPL-P314 and ACPL-W314 0.6 Amp Output Current IGBT Gate Driver Optocoupler

Description The ACPL-P314/W314 consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage

文件：202.37 Kbytes 页数：14 Pages

AVAGO

安华高

输出电流为 0.6Amp 的 IGBT 门驱动光电耦合器

ACPL-W314 门驱动光电耦合器内含一个 GaAsP LED，可与一个功率输出级集成电路进行光电耦合。这些光电耦合器可作为电机控制变频器应用中驱动功率 IGBT 和 MOSFET 的理想选择。 输出级的高工作电压范围提供了门控设备所需的驱动电压。 此类光电耦合器的输出电压和电流令其成为直接驱动中小型功率 IGBT 的理想之选。 ·高速响应\n·超高的共模抑制（CMR）能力\n·可靴带式供电电流\n·可按扩展型 SO-6 封装供应，爬电距离和电气间隙达 8 毫米\n·安全规范认证：\n- UL 认证 (UL 1577) 3750 Vrms/1min\n- CSA 认证\n-IEC/EN/DIN EN 60747-5-2 认证 VIORM = 630Vpeak（选择 060）\n可选方案包括：\n500 = 卷带式封装方案\n060 = IEC/EN/DIN EN 60747-5 -2\nXXXE = 无铅方案;

Broadcom

博通