3.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail

Description The ACPL-P341/W341 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 3.0 A maximum peak output

文件：276.52 Kbytes 页数：19 Pages

AVAGO

安华高

3.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO6

文件：781.18 Kbytes 页数：19 Pages

BOARDCOM

博通

3.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The ACPL-P341/W341 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 3.0 A maximum peak output

文件：276.62 Kbytes 页数：19 Pages

AVAGO

安华高

3.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The ACPL-P341/W341 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 3.0 A maximum peak output

文件：276.62 Kbytes 页数：19 Pages

AVAGO

安华高

3.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The ACPL-P341/W341 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 3.0 A maximum peak output

文件：276.62 Kbytes 页数：19 Pages

AVAGO

安华高

3.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The ACPL-P341/W341 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 3.0 A maximum peak output

文件：276.62 Kbytes 页数：19 Pages

AVAGO

安华高

扩展型 SO6 封装的带有轨至轨输出电压的 3.0 Amp 输出电流 IGBT 集成门驱动光电耦合器

ACPL-P341/ACPL-W341 门驱动光电耦合器包含一个 AlGaAs LED，并与一个功率输出级集成电路进行光电耦合。该门驱动光电耦合器非常适合于在电机控制变频器应用中使用的驱动功率 IGBT 和 MOSFET。\n\n输出级的高工作电压范围提供了门控设备所需的驱动电压。由此光电耦合器提供的电压和高峰值输出电流非常适合门驱动额定值达到 1200V/100A 的直接驱动 IGBT。\n\n对于额定值更高的 IGBT，可通过在 ACPL-P341/ACPL-W341 门驱动光电耦合器的输出端搭建分列的放大电路来实现。ACPL-P341 和 ACPL-W341 在 IEC/ EN/DIN ·3.0A 最大峰值输出电流\n·2.5A 最小峰值输出电流\n·轨至轨输出电压\n·200ns 最大传播延迟\n·100ns 最大传播延迟差\n·带有磁滞的 LED 电流输入\n·ICC = 3.0mA 的最大供电电流能够实现自举电源\n·带滞后欠压锁定 (UVLO) 保护\n·VCM = 1500V 时，共模抑制 (CMR) 能力至少达 35 kV/μs\n·工作电压 VCC15V 到 30V\n·工业温度范围：-40°C 至 105°C\n·安全规范认证：·UL 认可 3750/5000 VRMS/min。\n·CSA\n·IEC/EN/DIN EN 60747-5-2 VIORM = ;

Broadcom

博通