2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated

Description The ACPL-333J is an advanced 2.5 A output current, easy-to-use, intelligent gate drivers which make IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open collec

文件：304.41 Kbytes 页数：23 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated

Description The ACPL-333J is an advanced 2.5 A output current, easy-to-use, intelligent gate drivers which make IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open collec

文件：304.41 Kbytes 页数：23 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated

Description The ACPL-333J is an advanced 2.5 A output current, easy-to-use, intelligent gate drivers which make IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open collec

文件：304.41 Kbytes 页数：23 Pages

AVAGO

安华高

1.5 Amp Output Current IGBT Gate Driver Optocoupler

Description The ACPL-331J is an advanced 1.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open collec

文件：300.66 Kbytes 页数：22 Pages

AVAGO

安华高

输出电流为 2.5Amp 的 IGBT 门驱动光电耦合器， 配有集成去饱和 (VCE) 检测、故障状态反馈系统和有源米勒箝位器件。

ACPL-333J 光电耦合器是一款高端易用型智能门驱动器，输出电流为 2.5A，可设计用于小巧、经济且易于实现的 IGBT VCE 故障保护系统中。集成 VCE 检测、欠压锁定 (UVLO)、IGBT “软”关断、集电极开路错误反馈、故障自动复位、有源米勒箝位等特性可最大限度地提供设计灵活性与电路保护。\n\nACPL-333J 内含一个 GaAsP LED。该 LED 与一个功率输出级集成电路进行光电耦合。ACPL-333J 可作为电机控制变频器应用中驱动功率 IGBT 和 MOSFET 的理想选择。这些光电耦合器提供的电压和电流非常适合用来直接驱动规格达 1200V/150A 的 IGB ·带滞后欠压锁定保护 (UVLO)保护\n·去饱和检测\n·米勒箝位\n·集电极开路故障反馈\n·IGBT“软”关断\n·默认延时后自动复位\n·可按 SO-16 封装供应\n·安全规范认证：\n- IEC/EN/DIN-EN 60747-5-2 规范申请中 VIORM = 891VPEAK ，\n- UL 规范申请中，3750 VRMS/1 min，\n- CSA 规范申请中\n·可选方案包括：\n- 500 = 卷带式封装方案\n- xxxE = 无铅方案;

Broadcom

博通