2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO Fault Status Feedback and Active Miller Clamping

Description The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open coll

文件：299.32 Kbytes 页数：23 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO Fault Status Feedback and Active Miller Clamping

Description The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open coll

文件：299.32 Kbytes 页数：23 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Driver Optocoupler

Description The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open coll

文件：299.32 Kbytes 页数：23 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Driver Optocoupler

Description The ACPL-332J is an advanced 2.5 A output current, easy to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, isolated open coll

文件：299.32 Kbytes 页数：23 Pages

AVAGO

安华高

输出电流为 2.5Amp 的 IGBT 门驱动光电耦合器， 配有集成去饱和 (VCE) 检测、故障状态反馈系统和有源米勒箝位器件。

ACPL-332J 光电耦合器是一款高端易用型智能门驱动器，输出电流为 2.5A，可设计用于小巧、经济且易于实现的 IGBT VCE故障保护系统中。 集成 VCE 检测、欠压锁定 (UVLO)、IGBT“软”关断、集电极开路故障反馈、有源米勒箝位等特性可最大限度地提供设计灵活性与电路保护。 \n\nACPL-332J 内含一个 GaAsP LED。该 LED 与一个功率输出级集成电路进行光电耦合。ACPL-332J 可作为电机控制变频器应用中驱动功率 IGBT 和 MOSFET 的理想选择。这些光电耦合器提供的电压和电流非常适合用来直接驱动规格达 1200V/150A 的 IGBT。对于额定值 ·带滞后欠压锁定 (UVLO)保护\n·去饱和检测\n·米勒箝位\n·集电极开路故障反馈\n·IGBT “软”关断\n·由下一个 IGBT 开通周期进行故障复位\n·可按 SO-16 封装供应\n·安全规范认证：\n- IEC/EN/DIN-EN 60747-5-2 规范申请中 VIORM = 891VPEAK ，\n- UL 规范申请中，3750 VRMS/1 min，\n- CSA 规范申请中\n·可选方案包括：\n- 500 = 卷带式封装方案\n- xxxE = 无铅方案;

Broadcom

博通