GERMANIUM SMALL SIGNAL TRANSISTORS

[Germanium Power Devices Corporation] GERMANIUM SMALL SIGNAL TRANSISTORS PRO ELECTRON TYPES

文件：566.92 Kbytes 页数：4 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

丝印：AC132；Package：WQFN(BQA)；SN74AC132 Quadruple 2-Input NAND Gates with Schmitt-Trigger Inputs

1 Features • Wide operating range of 1.5V to 6V • Inputs accept voltages up to 6V • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Maximum tpd of 7.7ns at 5V, 50pF load 2 Applications • Alarm or tamper dete

文件：1.94352 Mbytes 页数：34 Pages

TI

德州仪器

丝印：AC132；Package：TSSOP(PW)；SN74AC132 Quadruple 2-Input NAND Gates with Schmitt-Trigger Inputs

1 Features • Wide operating range of 1.5V to 6V • Inputs accept voltages up to 6V • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Maximum tpd of 7.7ns at 5V, 50pF load 2 Applications • Alarm or tamper dete

文件：1.94352 Mbytes 页数：34 Pages

TI

德州仪器

丝印：AC132Q；Package：TSSOP(PW)；SN74AC132-Q1 Automotive Quadruple 2-Input NAND Gates with Schmitt-Trigger Inputs

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：1.71389 Mbytes 页数：35 Pages

TI

德州仪器

丝印：AC132Q；Package：WQFN(BQA)；SN74AC132-Q1 Automotive Quadruple 2-Input NAND Gates with Schmitt-Trigger Inputs

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：1.71389 Mbytes 页数：35 Pages

TI

德州仪器

模拟I/O用接口板

AC1324是一款可选的通用接口板，包括一个26引脚I/O连接器和26个I/O螺纹接线端子。26引脚连接器可接入AC1315或3B系列3B01、3B02或3B03背板的CAB-01电缆，26个螺纹接线端子用于互连任何模拟I/O子系统，如可编程控制器等。它既可以安装在AC1330机架安装套件的背面（应使用附带的支柱），也可以安装在快速轨道（snap track）中。

ADI

亚德诺