AAT2601B中文资料Total Power Solution for Portable Applications数据手册Skyworks规格书

描述 Description

The AAT2601B is a member of AnalogicTech’s Total Power Management IC™ (TPMIC™) product family. It contains a single-cell Lithium Ion/Polymer battery charger, a fully integrated step-down converter and 5 low dropout (LDO) regulators. The device also includes 2 load switches for dynamic power path/sleep mode operation, making it ideal for small handheld portable navigation devices.
The battery charger is a complete thermally regulated constant current/constant voltage linear charger. It includes an integrated pass device, reverse blocking protection, high accuracy current and voltage regulation, charge status, and charge termination. The charging current, charge termination current, and recharge voltage are programmable with an external resistor and/or by a standard I²C interface.
The step-down DC/DC converter is integrated with internal compensation and operates at a switching frequency of 1.5MHz, thus minimizing the size of external components while keeping switching losses low and efficiency greater than 92%.
The five LDOs offer 60dB power supply rejection ratio (PSRR) and low noise operation making them suitable for powering noise-sensitive loads.
All six voltage regulators operate with low quiescent current.The total no load current when the step-down converter and 2 LDOs are enabled is only 170μA.
The AAT2601B is available in a thermally enhanced low profile 5x5x0.8mm 36-pin TQFN package.

特性 Features

·Voltage Regulator VIN Range: 4.5V to 6V
·Complete Power Integration
·Integrated Load Switches to Power Converters from AC Adapter or Battery Automatically
·Low Standby Current
·170μA (typ) w/ Buck, LDO1, and LDO2 Active, No Load
·One Step-Down Buck Converter
·1.8V, 300mA Output
·1.5MHz Switching Frequency
·Fast Turn-On Time (100μs typ)
·Five LDOs Programmable with I²C
·LDO1: 3.3V, 300mA Programmable with I²C
·LDO2: 1.2V, 150mA
·LDO3: 1.2V, 150mA
·LDO4: 3.3V, 150mA Programmable with I²C
·LDO5: 3.3V, 150mA Programmable with I²C
·PSRR: 60dB@10kHz
·Noise: 50μVrms for LDO3, LDO4, and LDO5
·One Battery Charger
·Digitized Thermal Regulation
·Charge Current Programming up to 1.4A
·Charge Current Termination Programming
·Automatic Trickle Charge for Battery Preconditioning (2.8V Cutoff)
·Adapter OK (ADPP) and Reset (RESET) Timer Outputs
·Separate Enable Pins for Supply Outputs
·Over-Current Protection
·Over-Temperature Protection
·5x5mm TQFN55-36 Package

简介

AAT2601B属于集成电路（IC）的电源管理-专用。由制造生产的AAT2601B电源管理 - 专用专用型电源管理集成电路 (PMIC) 用于电源的控制或操作，适合特定或小范围的目标应用，例如汽车气囊管理、电容器组平衡、AC 公共电力监控、存储器总线端接、接地故障检测、能量收集、小型引擎管理、处理器或芯片集专用电压调节、负载突降保护、触觉驱动器、热电制冷器控制等。