AAT2402M/S数据手册Skyworks中文资料规格书

描述 Description

The AAT240M/2402S is a highly integrated, high efficiency white LED backlight solution for large size LCD panels used in LCD TVs. To accommodate power requirements, the solution consists of two devices, a master device (AAT2402M) and a slave device (AAT2402S).The devices operate from a regulated 12V or 24V DC power supply. The master device supplies a 40V rail to drive 10 series LEDs with a typical VF of 3.6V with up to 100mA. Sixteen precision current sinks, split evenly between the master and slave devices, provide a constant current drive for up to 160 white LEDs. Feedback from each of the current sinks is fed back to the boost converter to ensure the optimum voltage is applied to the LED strings. A high speed, SPI compatible interface allows fast, independent digital control of each current sink programmed to a maximum value using an external resistor.An 8-Bit Dot Correction register compensates for variations in LED brightness during LCD setup, while two 12-Bit registers control the grayscale current and delay time. Channel ON/OFF control is also included. Each Master and Slave contains a 2-Bit register which allows up to 256 LED strings to be controlled in a single system.The Grayscale PWM clock is internally generated or can be externally supplied. Fault handling and detailed reporting is handled by the SPI bus while a fault is indicated via a fault pin. The system monitors open or short circuit LEDs, and over-voltage, over-current and over-temperature protection.The AAT2402M and AAT2402S are available in Pb-free, thermally enhanced 36-pin 5x5mm TQFN packages.

特性 Features

·Boost Converter Switching Frequency Options
·600 kHz
·Sync to External Clock (optional)
·16 LED Current Sinks up to 100mA/ch
·±2.5% Accuracy (60mA)
·±2.0% Matching (60mA)
·SPI Interface
·Digitally Programmable Individual Channels
·Precision PWM Digital Brightness Control
·12-bit Individual Gray Scale PWM Brightness
·12-bit Individual Channel Phase Delay
·8-bit Individual Dot Correction
·Data synchronized to VSYNC
·VSYNC Derived Internal Oscillator
·VSYNC PWM and Delay Synchronization
·Device Addressing
·16 Possible Address Settings
·Up to 256 Current Sinks
·Soft-Start to Minimize Inrush Current