A6210

3 A, 2 MHz Buck-Regulating LED Driver

FeaturesandBenefits ▪User-configurableon-time,achievingswitching frequenciesupto2.0MHz ▪BrightnesscontrolthroughPWMofDISpin ▪Minimalexternalcomponentsrequired ▪Nooutputcapacitorrequired ▪Wideinputvoltagerange:9to46V ▪Low0.18Vsensevoltageforhighereffi

A6210

3 A， 2 MHz降压稳压LED驱动器; \n• User-configurable on-time, achieving switching frequencies up to 2.0 MHz \n• Brightness control through PWM of DIS pin \n• Minimal external components required \n• No output capacitor required \n• Wide input voltage range: 9 to 46 V \n• Low 0.18 V sense voltage for higher efficiency \n• Output Current: up to 3.0 A \n• Low standby current <100 µA \n• Thermal shutdown \n• Supplied in a thermally-enhanced 4 mm QFN package \n;

These parts are discontinued. Samples are no longer available. For new customers or new applications, please contact Allegro. Date of status change: December 2, 2014.\n\n The A6210 is a buck regulator that uses valley current-mode control. This control scheme allows very short switch on-times to be achieved, making it ideal for applications that require high switching frequencies combined with high input voltages and low output LED span voltages. \n\n Low system cost is accomplished through high switching frequencies of up to 2.0 MHz, allowing smaller and lower value inductors and capacitors. In addition, few external components are required through high levels of integration. Optimal drive circuits minimize switching losses. \n\n The switching frequency is maintained constant, as the on-time is modulated by the input voltage. This feed-forward control ensures excellent line correction. The on-time is set by an external resistor pulled-up to the input supply. \n\n Internal housekeeping and bootstrap supplies are provided which require the addition of only one small ceramic capacitor. A top-off charge pump ensures correct operation at light loads. \n\n Internal diagnostics provide comprehensive protection against input undervoltages and overtemperatures. \n\n The device package is a 16-contact, 4 mm × 4 mm, 0.75 mm nominal overall height QFN, with exposed pad for enhanced thermal dissipation. It is lead (Pb) free, with 100% matte tin leadframe plating. \n\nApplications High brightness LEDs LED driver modules, power supplies and lamps, such as MR16 and MR11

A6210GEUTR-T

3 A, 2 MHz Buck-Regulating LED Driver

FeaturesandBenefits ▪User-configurableon-time,achievingswitching frequenciesupto2.0MHz ▪BrightnesscontrolthroughPWMofDISpin ▪Minimalexternalcomponentsrequired ▪Nooutputcapacitorrequired ▪Wideinputvoltagerange:9to46V ▪Low0.18Vsensevoltageforhighereffi

A6210_11

The A6210 is a buck regulator that uses valley current-mode control.

A6210GEUTR-T

The A6210 is a buck regulator that uses valley current-mode control.

A6210GEUTR-T

Package：16-WQFN 裸露焊盘；包装：卷带（TR） 类别：集成电路（IC） LED 驱动器 描述：IC LED DRIVER RGLTR PWM 3A 16QFN