A5348中文资料的A5348是低电流，的BiCMOS电路的电离型烟雾检测器提供所有需要的特性。 (The A5348 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector.)数据手册Allegro规格书

描述 Description

The A5348 is a low-current, CMOS circuit providing all of the required features for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke all units will sound their alarm. In addition, special features are incorporated to facilitate alignment and test of the finished smoke detector.
The internal oscillator and timing circuitry keep standby power to a minimum by powering down the device for 1.66 seconds and sensing for smoke for only 10 ms. Every 24 on-off cycles, a check is made for a low battery condition. By substituting other types of sensor ICs or a switch for the ionization detector, this very-low–power device can be used in numerous other battery-operated safety/security applications.

特性 Features

•Low average standby current for long battery life
•Interconnect up to 125 detectors
•Piezoelectric horn driver
•Guard outputs for detector input
•Pulse testing for low battery
•Power-on reset (POR)
•Internal reverse battery protection
•Timer (Hush) mode for enabling reduced sensitivity period
•Built-in hysteresis reduces false triggering

简介

A5348属于集成电路（IC）的传感器检测器接口。由制造生产的A5348传感器和检测器接口该系列产品可执行信号调节、数据转换、激励生成和/或各种将传感器或变送器机构连接到主机设备所需的其他功能。示例包括用于 CCD 图像传感器的控制器、用于 4-20 mA 接口和类似应用的电流变送器、超声变送器前端、惠斯通电桥接口等。