Description

The A3245 integrated circuit is an omnipolar, ultrasensitive Hall-effect switch with a digital output. This sensor has an integrated regulator permitting operation to 24 V, making it the first omnipolar switch available for operation to 24 V. This device is especially suited for operation over extended temperature ranges, up to +150°C. Superior high-temperature performance is made possible through an Allegro® patented dynamic offset cancellation, which reduces the residual offset voltage normally caused by device overmolding, temperature excursions, and thermal stress.

The A3245 Hall-effect switch includes the following on a single silicon chip: voltage regulator, Hall-voltage generator, small signal amplifier, chopper stabilization, Schmitt trigger, and a short circuit protected open-drain output. Advanced BiCMOS wafer fabrication processing is used to take advantage of low voltage requirements, component matching, very low input offset errors, and small component geometries.

Continued on the next page…

Features and Benefits

▪ Omnipolar operation

▪ Chopper stabilization

▫ Superior temperature stability

▫ Extremely low switchpoint drift

▫ Insensitive to physical stress

▪ Reverse battery protection

▪ Output short circuit protection

▪ Solid state reliability

▪ Small size

▪ Robust EMC capability

▪ High ESD ratings (HBM)

A3245LLHLT-T属于传感器，变送器 > 磁性传感器 - 开关（固态）。Allegro MicroSystems制造生产的A3245LLHLT-T磁性传感器 - 开关（固态）该系列产品使用固态技术来检测是否存在超过某个特定幅度和/或标示的磁场，并提供指示是否存在此类磁场的双态输出。它们与磁簧开关以及线性或罗盘型固态器件不同，前者通过使用移动机械部件来提供类似的功能，后者提供指示所施加磁场的强度和/或方向的可变输出。