Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance

文件：318.12 Kbytes 页数：14 Pages

ALLEGRO

Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Field programmable for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator

文件：370.49 Kbytes 页数：14 Pages

ALLEGRO

High Sensitivity Hall Effect Latch

文件：1.08373 Mbytes 页数：2 Pages

MAT

美斯特类比

超灵敏双线式现场可编程稳定斩波单极霍尔效应开关

这些器件不再生产。该器件不得用于新设计应用。不再提供样品。状态变更日期：2011 年 10 月 31 日。\r\n\r\n推荐的代替产品：对于现有的客户转换，以及新客户或新应用，请参考以下部件：\r\n\r\n对于 A1185EUA-T，使用 A1192LUA-T\r\n对于 A1185LUA-T 和 A1186LUA-T，使用 A1193LUA-T\r\n对于 A1185ELHLT-T，使用 A1192LLHLX-T\r\n对于 A1186ELHLT-T 和 A1186LLHLT-T，使用 A1193LLHLX-T\r\nA1185 和 A1186 器件属超灵敏双线式稳定斩波单极霍尔效应开关 • 稳定斩波\r\n• 在工作温度范围以内低开关点漂移\r\n• 低应力灵敏度\r\n• 现场可编程以优化开关点\r\n• 芯片保护\r\n• 电源瞬态保护\r\n• 电池反接保护\r\n• 板上电压调节器\r\n• 3.5 - 24 V 工作电压;

Allegro

Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Field programmable for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator

文件：370.49 Kbytes 页数：14 Pages

ALLEGRO

Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance

文件：318.12 Kbytes 页数：14 Pages

ALLEGRO

Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance

文件：318.12 Kbytes 页数：14 Pages

ALLEGRO

Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Field programmable for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator

文件：370.49 Kbytes 页数：14 Pages

ALLEGRO

Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance

文件：318.12 Kbytes 页数：14 Pages

ALLEGRO

Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance

文件：318.12 Kbytes 页数：14 Pages

ALLEGRO