Two-Wire, Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch

Description The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor sw

文件：915.37 Kbytes 页数：14 Pages

ALLEGRO

Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Field programmable for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator

文件：407.67 Kbytes 页数：15 Pages

ALLEGRO

General-Purpose Hall Effect Latch Effect Latch

文件：1.10475 Mbytes 页数：2 Pages

MAT

美斯特类比

灵敏双线式现场可编程稳定斩波单极霍尔效应开关

这些器件不再生产。该器件不得用于新设计应用。不再提供样品。状态变更日期：2011 年 10 月 31 日。\r\n\r\n推荐的代替产品：对于现有的客户转换，以及新客户或新应用，请参考以下部件：\r\n\r\n对于 A1180LUA-T，使用 A1190LUA-T\r\n对于 A1182EUA-T 和 A1182LUA-T，使用 A1192LUA-T\r\n对于 A1182ELHLT-T 和 A1182LLHLT-T，使用 A1192LLHLX-T\r\n对于 A1183EUA-T 和 the A1183LUA-T，使用 A1193LUA-T\r\n对于 A1183ELHLT-T 和 the • 稳定斩波\r\n• 在工作温度范围以内低开关点漂移\r\n• 低应力灵敏度\r\n• 现场可编程以优化开关点\r\n• 芯片保护\r\n• 电源瞬态保护\r\n• 电池反接保护\r\n• 板上电压调节器\r\n• 3.5 - 24 V 工作电压;

Allegro

Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor sw

文件：356.82 Kbytes 页数：16 Pages

ALLEGRO

Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor sw

文件：356.82 Kbytes 页数：16 Pages

ALLEGRO

Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor sw

文件：356.82 Kbytes 页数：16 Pages

ALLEGRO

Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor sw

文件：356.82 Kbytes 页数：16 Pages

ALLEGRO

Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor sw

文件：356.82 Kbytes 页数：16 Pages

ALLEGRO

Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches

Description The A1180, A1181, A1182, and A1183 devices are sensitive, two-wire, unipolar, Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor sw

文件：356.82 Kbytes 页数：16 Pages

ALLEGRO