8N3Q001中文资料Quad-Frequency Programmable XO数据手册Renesas规格书

描述 Description

The 8N3Q001 is a Quad-Frequency Programmable Clock Oscillator with very flexible frequency programming capabilities. The device uses IDT's fourth generation FemtoClock® NG technology for an optimum of high clock frequency and low phase noise performance. The device accepts 2.5V or 3.3V supply and is packaged in a small, lead-free (RoHS 6) 10-lead Ceramic 5mm x 7mm x 1.55mm package. Besides the four default power-up frequencies set by the FSEL0 and FSEL1 pins, the 8N3Q001 can be programmed via the I2C interface to output clock frequencies between 15.476MHz to 866.67MHz and from 975MHz to 1,300MHz to a very high degree of precision with a frequency step size of 435.9Hz ÷ N (N is the PLL output divider). Since the FSEL0 and FSEL1 pins are mapped to 4 independent PLL M and N divider registers (P, MINT, MFRAC and N), reprogramming those registers to other frequencies under control of FSEL0 and FSEL1 is supported. The extended temperature range supports wireless infrastructure, telecommunication and networking end equipment requirements.

特性 Features

·Fourth generation FemtoClock® NG technology
·Programmable clock output frequency from 15.476MHz to 866.67MHz and from 975MHz to 1,300MHz
·Four power-up default frequencies (see part number order codes), re-programmable by I2C
·I2C programming interface for the output clock frequency and internal PLL control registers
·Frequency programming resolution is 435.9Hz ÷N
·One 2.5V, 3.3V LVPECL clock output
·Two control inputs for the power-up default frequency
·LVCMOS/LVTTL compatible control inputs
·RMS phase jitter @ 156.25MHz (12kHz - 20MHz): 0.244ps (typical), integer PLL feedback configuration
·RMS phase jitter @ 156.25MHz (1kHz - 40MHz): 0.265ps (typical), integer PLL feedback configuration
·Full 2.5V or 3.3V supply modes
·-40°C to 85°C ambient operating temperature
·Available in Lead-free (RoHS 6) package