8408中文资料MAXWELL数据手册PDF规格书

DESCRIPTION:

Maxwell Technologies’ 8408 is a monolithic quad 8-bit multiplying digital-to-analog CMOS converter. Each DAC has its own reference input, feedback resistor, and onboard data latches that feature read/write capability. The readback function serves as memory for those systems requiring self-diagnostics.

A common 8-bit TTL/CMOS compatible input port is used to load data into any of the four DAC data-latches. Control lines DS1, DS2 and A/B determine which DAC will accept data. Data loading is similar to that of a RAMs write cycle. Data can be read back onto the same bus with control line R/W. The 8408 is a bus compatible with most 8-bit microprocessors, including the 6800, 8080, 8085, and Z80. The 8408 operates on a single +5 volt supply and dissipates less than 20 mW. The 8408 is manufactured using highly stable, thin-film resistors on an advanced oxide-isolated, silicon-gate, CMOS process. The improved latch-up resistant design eliminates the need for external protective Schottky diodes.

FEATURES:

• RAD-PAK® patented shielding against natural

• space radiation

• Total dose hardness:

- equal to 100 krad (Si), depending upon orbit and space mission

• Package:

- 28 pin RAD-PAK® Flat Pack

• Single Supply Ooperation (+5V)

• Four 8 Bit DACs in one 28 Pin Package

• D/As Matched to within 1

• TTL/CMOS Compatable

• Four-Quadrant Multiplication