Isolating switching amplifier 1-channel

Sensors according to EN 60947-5-6 (NAMUR) or potential-free contacts can be connected to the IM12-DI03-1S-2T-SPR/24VDC isolating switching amplifier. The device can be installed in zone 2. The device can be switched between 1-channel operation with signal doubling or 1-channel operation with al

文件：343.63 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating transducer 1-channel

The isolating transducers IM12-AI01-1I-2IUHPR/24VDC/CC transmit analog measured signals galvanically isolated. The devices are suitable for operation in zone 2. The 1-channel device has one input for the operation of HART® 2-wire transducers as well as active and passive HART® 2-wire transmi

文件：344.15 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating switching amplifier 1-channel

Sensors according to EN 60947-5-6 (NAMUR) or potential-free contacts can be connected to the IMX12-DI03-1S-2R-SPR/24VDC isolating switching amplifier. The device is equipped with intrinsically safe input circuits and can be installed in zone 2. The device can be switched via DIP switches bet

文件：376.03 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Frequency Transducer/Pulse Counter 1-channel

The frequency transducer IM12-FI01-1SF-1RPR/24VDC transmits frequency signals up to 20,000 Hz galvanically isolated. This device is used for monitoring limit values. The device is suitable for use in Zone 2. The one-channel device is equipped with two inputs for the connection of sensors acc.

文件：319.79 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Analog Signal Isolator 2-channel

The 2-channel IMX12-AO01-2I-2IHPR/24VDC/CC signal isolator is designed to transmit the normalized current signal galvanically isolated 1:1 from the non-Ex area to the Ex area. In addition to the analog signal, digital HART® communication signals can also be transmitted bidirectionally. Typical

文件：343.05 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating switching amplifier 1-channel

Sensors according to EN 60947-5-6 (NAMUR) or potential-free contacts can be connected to the IM12-DI03-1S-1NAM1T-PR/24VDC NAMUR repeater. This can be installed in zone 2. The output circuit is also equipped with a transistor output. The device can be powered from a power bridge that also tran

文件：339.59 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Temperature measuring amplifier 2-channel

The 2-channel temperature measuring amplifier IMX12-TI02-2TCURTDR-2I-CPR/24VDC/ CC has inputs for: Thermocouples acc. to IEC 60584, DIN 43710, GOST R 8.585-2001, low voltages (-150…+150 mV), RTDs acc. to IEC 60751, DIN 43760, GOST 6651-94 (2, 3-wire) and resistors 0…5 kò (2, 3-wire). The devi

文件：452.74 Kbytes 页数：6 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating switching amplifier 1-channel

Sensors according to EN 60947-5-6 (NAMUR) or potential-free contacts can be connected to the IMX12-DI03-1S-2R-SPR/24VDC isolating switching amplifier. The device can be installed in zone 2. The device can be switched between 1-channel operation with signal doubling or 1-channel operation with a

文件：342.77 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating transducer 1-channel

The isolating transducers IM12-AI01-1I-2IUHPR/24VDC transmit analog measured signals galvanically isolated. The devices are suitable for operation in zone 2. The 1-channel device has one input for the operation of HART® 2-wire transducers as well as active and passive HART® 2-wire transmitter

文件：310.57 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating switching amplifier 1-channel

Sensors according to EN 60947-5-6 (NAMUR) or potential-free contacts can be connected to the IMX12-DI03-1S-1NAM1T-PR/24VDC/CC NAMUR repeater. The device is equipped with an intrinsically safe input circuit and can be installed in zone 2. The output circuit is additionally equipped with 1 trans

文件：377.69 Kbytes 页数：5 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司