74VHCT9541AFT中文资料东芝数据手册PDF规格书

Functional Description

• Octal Universal Schmitt Buffer with 3-State Outputs

General

The 74VHCT9541AFT is an ultra-high-speed octal Schmitt buffer fabricated using silicon-gate CMOS technology.

The 74VHCT9541AFT combines low power consumption of CMOS with Schottky TTL speeds.

The input voltage are compatible with TTL output voltage.

This device may be used as a level converter for interfacing 3.3 V to 5 V system.

The outputs can be put in the high-impedance state by placing a logic HIGH on the Enable (G) input. The CONT

input determines the logical inversion of data. A logic LOW on the CONT input configures the 74VHCT9541AFT

as an inverter; a logic HIGH on the CONT input configures the 74VHCT9541AFT as a buffer.

All the inputs have hysteresis between the positive-going and negative-going thresholds. Thus the

74VHCT9541AFT is capable of squaring up transitions of slowly changing input signals and provides an improved

noise immunity.

Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins

without regard to the supply voltage. These structure prevents device destruction due to mismatched supply and

input/output voltages such as battery back up, etc.

Note: Output in off-state

特性 Features

(1) AEC-Q100 (Rev. H) (Note 1)

(2) Wide operating temperature range: Topr = -40 to 125 

(3) High speed: tpd = 6.5 ns (typ.) at VCC = 5.0 V

(4) Low power dissipation: ICC = 4.0 μA (max) (Ta = 25 )

(5) Compatible with TTL inputs: VIL = 0.5 V (max)

VIH = 2.1 V (min)

(6) Power down protection is provided on all inputs.

(7) Balanced propagation delays: tPLH ≈ tPHL

(8) Input terminals are at the opposite side of Output terminals