74LVC2G241DCTRG4集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

74LVC2G241DCTRG4属于集成电路（IC）的缓冲器驱动器接收器收发器。由美国德州仪器公司制造生产的74LVC2G241DCTRG4缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

1 Features

1• Available in the Texas Instruments

NanoFree™ Package

• Supports 5-V VCC Operation

• Inputs Accept Voltages to 5.5 V

• Max tpd of 4.1 ns at 3.3 V

• Low Power Consumption, 10-μA Maximum ICC

• ±24-mA Output Drive at 3.3 V

• Typical VOLP (Output Ground Bounce)

<0.8 V at VCC = 3.3 V, TA = 25°C

• Typical VOHV (Output VOH Undershoot)

>2 V at VCC = 3.3 V, TA = 25°C

• Ioff Supports Live Insertion, Partial-Power-Down

Mode, and Back-Drive Protection

• Can Be Used as a Down Translator to Translate

Inputs From a Max of 5.5 V Down

to the VCC Level

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

2 Applications

• AV Receivers

• Blu-ray Players and Home Theaters

• DVD Recorders and Players

• Desktop or Notebook PCs

• Digital Radio or Internet Radio Players

• Digital Video Cameras (DVC)

• Embedded PCs

• GPS: Personal Navigation Devices

• Mobile Internet Devices

• Network Projector Front-Ends

• Portable Media Players

• Pro Audio Mixers

3 Description

This dual buffer and line driver is designed for 1.65-V

to 5.5-V VCC operation.

The SN74LVC2G241 device is designed specifically

to improve both the performance and density of 3-

state memory-address drivers, clock drivers, and busoriented

receivers and transmitters.

NanoFree package technology is a major

breakthrough in IC packaging concepts, using the die

as the package.

The SN74LVC2G241 device is organized as two 1-bit

line drivers with separate output-enable (1OE, 2OE)

inputs. When 1OE is low and 2OE is high, the device

passes data from the A inputs to the Y outputs. When

1OE is high and 2OE is low, the outputs are in the

high-impedance state.

To ensure the high-impedance state during power up

or power down, OE should be tied to VCC through a

pullup resistor, and OE should be tied to GND

through a pulldown resistor; the minimum value of the

resistor is determined by the current-sinking or the

current-sourcing capability of the driver.

This device is fully specified for partial-power-down

applications using Ioff. The Ioff circuitry disables the

outputs, preventing damaging current backflow

through the device when it is powered down.