74LVC162373A集成电路（IC）的锁存器规格书PDF中文资料

74LVC162373A属于集成电路（IC）的锁存器。由安世半导体(中国)有限公司制造生产的74LVC162373A锁存器锁存器是类似于触发器的基本数字存储设备，但是不同之处在于，在锁存使能（或类似命名）信号处于有效逻辑状态的任何时间，保持的逻辑状态都可以改变。“透明”锁存器还允许设备输出在锁存使能信号有效时反映输入的当前状态，而相反的是，状态仅在保持状态已固定时改变。

1. General description

The 74LVC162373A and 74LVCH162373A are 16-bit D-type transparent latches with 30 Ω

termination resistors and 3-state outputs. The 74LVCH162373A has separate D-type inputs with

bus hold for each latch. Both devices can be used as two 8-bit transparent latches or a single 16-

bit transparent latch. Both devices feature two latch enables (1LE and 2LE) and two output enables

(1OE and 2OE), each controlling 8-bits. When nLE is HIGH, data at the inputs enter the latches.

In this condition the latches are transparent, a latch output will change each time its corresponding

D-input changes. When nLE is LOW the latches store the information that was present at the inputs

a set-up time preceding the HIGH-to-LOW transition of nLE. A HIGH on nOE causes the outputs to

assume a high-impedance OFF-state. Operation of the nOE input does not affect the state of the

latches. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these

devices as translators in mixed 3.3 V and 5 V environments.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

These devices are fully specified for partial power down applications using IOFF. The IOFF circuitry

disables the output, preventing the potentially damaging backflow current through the devices

when they are powered down.

2. Features and benefits

• Overvoltage tolerant inputs to 5.5 V

• Wide supply voltage range from 1.2 V to 3.6 V

• CMOS low power consumption

• Multibyte flow-through standard pinout architecture

• Multiple low inductance supply pins for minimum noise and ground bounce

• Direct interface with TTL levels

• All data inputs have bus hold (74LVCH162373A only)

• IOFF circuitry provides partial Power-down mode operation

• Complies with JEDEC standard:

• JESD8-7A (1.65 V to 1.95 V)

• JESD8-5A (2.3 V to 2.7 V)

• JESD8-C/JESD36 (2.7 V to 3.6 V)

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-B exceeds 200 V

• CDM JESD22-C101E exceeds 1000 V

• Specified from -40 °C to +85 °C and -40 °C to +125 °C